Yksityisyysasetukset
Inderes käyttää evästeitä tarjotakseen paremman käyttökokemuksen ja henkilökohtaisemman palvelun. Hyväksymällä evästeiden käytön voimme kehittää palvelua entistä paremmin ja pystymme tarjoamaan sinua kiinnostavaa sisältöä.
  • Foorumi
  • Premium
  • Osakemarkkinat
    • PörssiReaaliaikaiset kurssit, indeksit ja markkinakehitys
    • AamukatsausPäivittäinen markkinakatsaus ja yön tärkeimmät tapahtumat
    • PörssikalenteriTulevat tulokset, listautumiset ja yritystapahtumat
    • OsinkokalenteriTulevat ja menneet osingot
  • Yhtiöt
    • YhtiötSelaa ja suodata listattujen yhtiöiden listaa
    • Löydä osakkeitaInspiraatiota seuraavaan sijoitukseesi
    • ListautumisetUudet listautumiset ja tulevat pörssiannit
    • YhtiökokouskutsutYhtiökokousten päivämäärät ja osakkeenomistajatiedot
  • Osaketutkimus
    • AnalyysiAsiantuntijoiden osakeanalyysi ja suositukset
    • ArtikkelitUutiset, näkemykset ja markkinakommentit
    • MallisalkkuInderesin mallisalkku
    • FemmeRohkeutta ja itseluottamusta sijoittamiseen
  • Opi sijoittamisesta
    • AnalyysikouluOpi lukemaan ja ymmärtämään osakeanalyysiä
    • SijoituskouluOppaita ja oppitunteja sijoitusosaamisen kasvattamiseen
    • SalkunhaltijatSijoitustietoa jokaiselle tasolle, ensiaskeleista edistyneisiin salkkustrategioihin.
    • inderesTVVideokeskus osaketutkimukselle, analyysille ja asiantuntijakommenteille
    • TranskriptitTulosjulkistusten ja sijoittajatapaamisten tekstimuotoiset tallenteet
    • OsakevertailuVertaa tunnuslukuja ja kehitystä useiden osakkeiden välillä
    • TuloskausiVertaile EPS-ennusteita toteutuneisiin tuloksiin
    • Sisäpiirin kaupatSeuraa yhtiöiden sisäpiiriläisten osto- ja myyntitoimintaa
    • LyhyeksimyyntiKatso, millä pörssiyhtiöillä on ilmoitettuja lyhyitä positioita
    • Virtuaalinen analyytikkochatEsitä kysymyksiä ja saa tekoälypohjaisia sijoitusnäkemyksiä
    • Korkoa korolle -laskuriLaske, miten säästösi kasvavat korkoa korolle -ilmiön ansiosta.
Sosiaalinen media
  • Inderes Foorumi
  • Youtube
  • Facebook
  • Instagram
  • X (Twitter)
  • Tiktok
  • Linkedin
Yhteystiedot
  • info@inderes.fi
  • +358 10 219 4690
  • Porkkalankatu 5
    00180 Helsinki
Inderes
  • Meistä
  • Tiimi
  • Avoimet työpaikat
  • Inderes sijoituskohteena
  • Palvelut pörssiyhtiöille
Sivusto
  • UKK
  • Q&A
  • Käyttöehdot
  • Tietosuojaseloste
  • Vastuuvapauslauseke

Inderesin vastuuvapauslauseke löytyy täältä. Kunkin Inderesin aktiivisessa seurannassa olevan osakkeen tarkemmat tiedot löytyvät kunkin osakkeen omilta yhtiösivuilta Inderes-sivustolla. © Inderes Oyj. Kaikki oikeudet pidätetään.

Transkriptit

Lue webcast- ja audiocast-lähetysten transkriptejä

Transkriptit

Lue webcast- ja audiocast-lähetysten transkriptejä

Kaikki markkinat
Suomi
Ruotsi
Tanska
Norja
Uusimmat
Suositut
Seuratut

Atlas Copco Group, Audiocast, Q3'26

Julkaissut Inderes22.10.2026 klo 12.00
Atlas Copco

Huomio: Tämä on koneellisesti luotu transkripti ja se saattaa sisältää epätarkkuuksia.

Peter
00:00 - 00:44

Thank you. Operator. And to all of you on the call. A very warm welcome to this Q3 2026 earnings call for Atlas Copco Group. Before I hand over to Wagner to start with the short presentation, I will now remind you to only ask one question at a time. During the question and answer session, just to make sure that all participants in the call have the opportunity to raise at least their one question. One most important question, we will of course go through the queue. We, of course, create the opportunity to ask a second question afterwards. But without further ado, I will hand over to Wagner to present the quarter results.

Wagner
00:45 - 18:25

Thank you, Peter, and welcome to this conference call where we will present the Q3 2026 results. And we are also quite happy to announce the result. I think we are quite pleased to see the development in orders received, with a very strong order intake driven by several product lines, several divisions, and the core business areas delivering organic growth, and three of them with double-digit organic growth. It was really good to see. Of course, Vacuum Technique is outstanding. Very nice development there. But basically, most of our divisions are doing quite well with good organic growth. We also see continued growth in service, which is part of our strategy for several quarters. We have positive development in our service divisions. Also very happy to see that. And also, the activity level was strong, and order intake was strong. We had record revenues, quite happy to see the level we managed to reach, driven mainly by Vacuum Technique as we are going to speak later on. But we are quite happy with that development as well. So, regarding profit margins, I think what I am happy about is seeing the sequential improvement. I think that was good. And also the fact that we are ramping up, we are now delivering record levels in revenues. And we also managed to deliver a solid operating cash flow. We are also quite happy with that development. And in the quarter, we closed four acquisitions. So then looking more into the numbers, 52.3 billion Swedish kronor in orders received, which is an absolute record value. Also a record level, but we have some currency help there, which ended up in 25% organic growth. Quite solid, as I mentioned before, record revenues of 47.9 billion Swedish krona. Organic growth of 11% was also good to see in vacuum technique. They managed to have very good output and strong organic growth in revenues as well. Profit margins are at 20.8%. But here we had some items affecting comparability in this quarter; the main item was restructuring that we have done in Industrial Technique, specifically related to our German product companies. We had to make an adjustment in Industrial Technique due to low activity and lower volume, but the underlying margin was 21.3%. The operating profit of 7.7 billion Swedish krona is also very solid, with an increase in basic earnings for sure. It is a very solid cash flow. As I mentioned, year-on-year you see a drop in the return on capital employed. But sequentially, we have seen an improvement. We see an improvement in our return on capital employed. Then if we go to the regional split, we are also quite happy to see growth in all the continents. If I start in Asia, very strong development, 39% growth, mainly driven by vacuum technique, but also the other business areas developed quite well. We have a little bit more of a challenge in industrial technique, but most of all the other three business areas had good development in Asia. When I go to Europe, we saw 8% growth; it was a bit flattish in the compressor technique business area, but very solid in vacuum technique, good in industrial technique, and also very good in power technique. But considering the situation that we see in Europe, we are quite pleased with 8% growth because the environment is a little bit more challenging. But we still manage to grow our business in Europe; then, North America was very solid as well, with 39% growth, again mainly driven by vacuum technique, but all the business areas have developed quite nicely in North America this quarter. Power technique was super solid, and industrial technique was as well, driven by both automotive and general industry. Very strong in compressor technique. Also very solid growth in North America. So, in South America, we achieved 4% growth. It is good to see the region developing. Well, the major country in South America is growing despite the election. A little bit of challenge, but still good growth. And also, we see a recuperation in Africa and the Middle East with plus 21% after a couple of quarters. A little bit more challenging, it is also good to see good development there, where our main businesses are growing quite nicely. It is quite good to see the regional spread and the development of our orders in the different continents. And that is translated then to a 25% organic order increase in our orders received, with 3% structural growth coming from our acquisitions. So total and a little bit of currency helping the top line total grow 29%, which is, as I said before, quite happy to see that development. Then if we go to the different business areas, compressor technique had, as we have mentioned, 6% organic growth; vacuum technique had 82% organic growth, quite an outstanding development in vacuum technique, but also in power technique. 13%. Industrial Technique delivered 12% organic growth. Solid growth, and it is also good to see the contribution of Vacuum Technique growing on a 12-month rolling basis. Then, if we go into more detail talking about the business areas, organic growth was 6% in Compressor Technique; we are quite happy to see solid demand for our compressors, although it is a little bit more challenging in Europe, as I mentioned before, but not a drama. But it is good to see 6% organic growth on our gas and process compressors there. The development keeps on going quite well. We see LNG continues to be a good contributor, especially coming from the US, but not only. Also this quarter, we saw good development in market segments like heat pumps for district heating in Europe as one example of markets that performed well this quarter, and our compressor technique service continues to grow. And that has happened for quite some time. Quite happy to see as well 5% organic growth on Compressor Technique when it comes to revenue. It is good to see. We also need to further increase output because of the organic growth, and the operating margin at 23.6% was negatively impacted by currency, sales mix from different products and geographies, and higher supply chain costs. So it is lower than last year. But it is fair to say that this remains the highest profitability we have in the group. We know we can perform better over time, but the most important thing for Compressor Technique is to continue to grow, and we continue to invest in technologies to achieve that. One example is this innovation on the cooling side, where we can integrate cooling or work together with cooling and compressors, for instance, which could provide quite a nice saving for our customers. Not only that, we also closed an acquisition this quarter, Eric Clement, that we have added in the report as well. It is a quite important acquisition because it will allow us to step into new markets. There will be more cooling, but not only that; I think they also have low-temperature heat pumps. We are going to work now at the beginning of this acquisition to unlock this value. Of course, when you do that, there are quite a lot of integration items at the beginning, but I think Compressor Technique keeps on building technologies that will allow them to have sustainable, profitable growth. And that is what we have achieved over the years. And we will continue. So when it comes to vacuum technique, 2% organic growth is really good to see that development. For sure. And this is for vacuum technique, where we saw fantastic development in the semiconductor market. But not only that, I think we are quite happy as well to see the development in industrial and scientific vacuum. So there are market segments doing quite well where we see quite a lot of investments in segments like space R&D, with other countries investing more in R&D. That is increasing the demand for our products. In industrial vacuum, we see metallurgy as a very important segment, and battery production as well, which are both important segments. The service business continues to grow. Revenue was really good to see 28% organic growth in the revenues, and all that has translated into improved profit and profitability, reaching a 22.2% operating margin, mainly driven by increased volume. And we had an impact coming from currency. It is also good to see the return on capital employed going up. And we continue to focus on innovation. This product is for industrial vacuum applications. A new vacuum pump. That was one of the first products that we developed. When we started to step into vacuum. And now we have come with a new design with better energy efficiency. And we continue our journey on innovation as well in Vacuum Technique. So when it comes to Industrial Technique, I was very pleased with 12% organic growth. Really notable growth, very good growth in general industry. I think there we managed to focus on growing market segments like electronics, aerospace, defense, and some other segments where we can find good growth. Our products have been very well perceived. Some of these market segments need to do a fast ramp-up, and we have the right products to support them with that. But not only that; secondly, solid growth in automotive equipment, mainly driven by the US. This is because our customers need flexible production lines. There is a lot of reorganization going on in the US that requires flexible production lines. And we have the right products for that. But not only that, we also see good focus on automation. As we have mentioned on previous occasions, our focus on automation and the acquisitions we have made to further unlock this journey are now bringing good results, especially in the US, where we see strong activity levels and 2% organic revenue growth. Profit improved, but 18.7% is not where we want to be. And this time, we have made the necessary adjustments. Like I mentioned at the beginning, some of our German operations were not at the level we would like. And then we decided to adjust. The underlying profitability is 20.6%. So stable return on capital employed. And here at the bottom, you can also see a nice innovation. Now for bolting applications or high-torque applications. It offers improved safety and repeatability. And the good thing about this. Normally, you can do this hydraulically. But when you add some measurement equipment. You can really offer much better solutions for our customers with process control. And that part of the business is also growing quite nicely, I must say. Moving to the last business area, Power Technique, we also saw solid growth of 13%. We see improved demand overall, with all the divisions performing well. Of course, the development in the US is super strong because organic growth is very good. On top of that, we have completed an acquisition of NTV that is also performing well. So in many geographies, Power Technique is performing well. Good growth as well in specialty rental and continued growth as well in our service business. It is also good to see that they can catch up on revenues. So very solid revenues. Also, I improved the profitability. It was also nice to see that they managed. Since Q1, they have bent the trend and improved profitability. That was also quite good to see. They continue to invest in innovation. In this case, it is a new generator for power. We have two generators inside that canopy or container. The benefit of that is a variable load. Applications can really save a lot of fuel consumption. So keep on investing. And you see that they are also running at record levels. Revenue also in Power Technique reached record levels. So when we look at our operating margin, if we exclude the depreciation of intangibles of the acquired entities, we reach 22.2%, which is a good development, I must say, but perhaps with that I can pass to you, Peter, so you can continue on the income statement.

Peter
18:26 - 28:48

Okay. Thank you. Wagner. So, I think operating profit was 9,950 MSEK, close to 10 billion, unadjusted compared to 8,500 MSEK. Net financial items were slightly higher than last year, mostly due to the fact that we have a bit of a lower cash position. And of course, interest rates tend to be a bit higher. So that is the explanation for that. Likely this is going to be on a similar level going forward next quarter. Then the income tax expense was just above 2 billion compared to 1.8 billion last year. A very strong effective tax rate of 21%. We benefited quite a lot from a few tax credits that we managed to acquire, and that helped us to lower the effective tax rate significantly, a bit better than we had actually initially anticipated before the quarter started. So we are very pleased with that. But of course, that being said, for the next quarter, we would rather expect the effective tax rate to be slightly higher. We think maybe somewhere around 22.5%. And that brings us then to the profit for the period of 7.7 billion, compared to 6.7 billion a year ago, an increase of roughly 1 billion Swedish kronor. If I then move to slide number 12, we can talk briefly about the profit for Q3 compared to last year. As you can see, the share-based LTI programs have basically no impact. There is an impact in the quarter, but it is almost exactly the same as last year. Therefore, there is no net impact on the margin. The items affecting comparability, as we already said last year, we had some restructuring costs both in Vacuum Technique as well as in Industrial Technique. In total, this was 206 million Swedish kronor. This year, we have this one-time cost related to Industrial Technique of 132 million SEK, leading to this net 73, which then has a positive impact on the margin, or at least a small one. Also, the acquisitions are slightly dilutive. Uh. As you can see, the currency also had a bit of a negative effect. And okay, I would say basically, the main reason for that is the operating exchange differences. And specifically, if I want to isolate one particular currency that had a significant contribution to that total number, it was the Korean won that strengthened quite substantially across the third quarter and affected us considering the different types of operation we have, for example, in vacuum, in compressors, etc. . So that is the explanation for that effect. And then last but not least, we have the organic development of the margin, with good drop-through and a good positive impact on the margin, mostly driven by the organic revenue volumes, the combination of volumes, price, etc. Leading to that improved margin. But then, to give you a little bit more color, we can go business area by business area on slide number 13, starting with Compressor Technique. As Wagner already mentioned, we see a robust operating profit with a strong focus on continued growth for the future. But then, acquisitions here were also slightly dilutive, and the currency effect was negative, basically for the same reason as I just explained regarding operating exchange differences; the most important currency in that effect was the Korean won, amidst many others of course, but the Korean won was the most important detractor for that particular point. And then, organically, a little bit of a dilution, you could say, partly because of a mix that consists of many different components, but highlighting the product mix as well as the geographic mix that plays into that. And then, as we already explained also in the text of the report, we see an increased cost pressure from the supply chain. And I think we are all aware, given the hot environment that we are all in, with the data centers being built all over the place, there is a high demand for many different types of commodities. And that, of course, has a bit of an impact in the short term, at least, on the product cost, thinking about things like oil prices, not to be forgotten, of course, aluminum castings, desiccant, electrical and electronic components, etc. . So I think that explains a little bit what is going on. But as I already said, it is still the highest margin across all the four business areas in the group. And I think overall, it is still very solid within the industrial space. And again, we have always indicated that, even if we had 25% margin and more at some point in time, that this was not necessarily going to stay like that all the time. And our main focus is growth of the business with good value creation for the shareholders in absolute terms. Even if we need to sacrifice due to investments we need to make in the relative margin. Moving on to Vacuum Technique, there is a very strong development in the margin or in the results for Vacuum Technique driven by the volumes. As you can imagine, we also indicated last quarter, and that still continues to be the case, that the ramp-up cost is still affecting the margin to some extent. Aside from the negative currency that we already mentioned, a slight dilutive effect from the acquisitions, and of course, a positive impact from the fact that we can see the restructuring costs from last year coming back into the margin, so to speak. But again, I think we see a continued sequentially improved operating margin in Vacuum Technique. And for that, we are extremely pleased that we can continue to harvest from the volume increase that we are generating and, most importantly, that we are able to deliver to our customers according to their expectations. That continues to be the key issue. And if that requires a little bit of higher ramp-up costs and also more agility for the future, then we are quite fine with that. We still see margin expansion within Industrial Technique. I would say I am pleased with the fact that we see a very strong margin development. Of course, there is now the effect of the restructuring cost, but this is a one-off. And I think it is, of course, to make sure that we adjust ourselves specifically around the automotive area in Europe to the current situation. Then, the currency effect is not really relevant, even though slightly negative. But then on the margin, we see a very strong improvement. To be fair, we need to say that on the one hand, volume price mix is contributing to that. On the other hand, there is a decreased cost level of tariffs compared to last year. Last year they were exceptionally high. I would say in the early stages today they are a bit more normalized. And that is one thing that you also see coming back in Q3 2026 here, which might not necessarily come back in the coming quarters. And then last but not least, Power Technique also here. Both in Industrial Technique and Power Technique, we have done several restructuring activities over the last one and a half to two years. And of course, that is also paying off in the margin. But also the fact that we have a strong volume price mix development within Power Technique contributes to this margin improvement to 18.3%. The currency also here was slightly negative. Acquisitions, mainly due to the LTI acquisition as well as Clement, have had a positive impact on the margin given the good development there. If we think about the foreign exchange effect in the quarter and look forward to Q4, we do believe that, all things being equal, of course, I am not the oracle of Delphi so I cannot predict exchange rates, but we do expect that the bottom line in absolute numbers will turn slightly positive, somewhere around half a billion Swedish krona. We assume that is likely to be the currency effect in Q4. With that, I will move to slide number 14 on the balance sheet. To be honest, there is not much news to report here. The main thing I would like to mention is that the dividend is being paid as we speak; actually, tomorrow the dividend will be officially paid out. We already went ex-dividend a few days ago. So that is the main impact. I would say that is going to happen. Otherwise, I think a relatively normal development, of course, in the context of the cash flow on slide number 15, I would like to highlight the development of the inventories, the receivables, and payables, because besides the fact that we have had quite a nice improvement in the operating cash surplus linked to the business development, we have seen over the quarter the strong revenues and the operating profit coming out of that. We also saw less than one would expect in a change in the working capital. I mean, with the growth that we are going through, the ramp-up we need to do. One would expect higher inventories. Of course, more invoicing means more receivables. Yet if we look at the cash flow, we don't really see that effect rising in a material way. -87 million MSEK. So as a result, I would say we are very pleased with the cash flow. It is not a record level, we are glad to admit. But at the same time, in the current growth environment, we believe that the cash flow is solid for the third quarter. And with that, I would like to hand over back to Wagner for some conclusions and an explanation about the near-term outlook.

Wagner
28:49 - 30:28

Thank you, Peter. And I would like to repeat that our forward-looking statement is a sequential guidance for the next quarter and refers to our customer activity, excluding large orders, potential FX swings, and seasonality. I would like to emphasize here that between Q3 and Q4, we have seen over the last years that we do have seasonality. We do have that impact. And of course, we do not know the level of the seasonality, especially if you consider we have record levels of orders received, especially in the semiconductor sector. We saw quite nice order development. So it is hard to predict what is going to happen in the semiconductor market. But we continue to be very positive about the semi market. So, a lot of opportunities. So we are quite positive. We just don't know how it is going to play out between Q3 and Q4. And how big is the seasonality? But for most of all of the other segments, we believe the activity will remain at the current level. And again, how all that will be translated into orders. It is hard to say. We just need to make sure you consider the seasonality between Q3 and Q4.

Peter
30:30 - 30:46

Thank you. With that, we have come to the end of the presentation and the comments that we want to share with you, and we would like to open up for questions now. So please, operator, if you can guide us through the list. Thank you.

Operator
30:46 - 31:05

If you wish to ask a question, please dial pound key five on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial the pound key on your telephone keypad. The next question comes from Daniel Acosta from Goldman Sachs. Please go ahead.

Daniel Acosta
31:06 - 31:33

Hi. Good afternoon. I just wanted to focus my question on the Compressor Technique business area. If you could provide a little bit more color on what in industrial compressors has driven that slight sequential deceleration, whether that is temporary, and what the impact of the supply chain headwinds is that you have seen both on the top line and on the margin? If you can give any color about how this should evolve going forward as well?

Wagner
31:34 - 32:20

Yes. Hey, Daniel, thank you for the question. Yeah. Perhaps you should not read too much into this sequential development because we reported it as somewhat lower. It is mainly about Europe. I think we remain quite positive that we can continue to grow the industrial compressor market. There are even positive signs in certain areas. We gain market share, which means, if I can be very specific, in China this quarter, we were quite happy with the development because we did gain market share there. So, I would not read too much into the margin. Perhaps Peter, you can comment.

Peter
32:20 - 33:42

Yeah. I think regarding the margin development, we are seeing cost pressure. Of course, as I said, I think it is linked to a hot market in terms of delivering a lot of industrial equipment. Um, okay. I indicated, of course, the data centers as being very much in the news, but there's a lot of other things ongoing at the same time. And as a result, electronic components, for example, are definitely under pressure. In terms of pricing, I think we all know that if you want to buy a laptop nowadays, you are going to pay a lot more than just nine months ago. And that is of course also valid for us at this moment in time, even if we have taken some precautions to try to stock up a little bit in a smart way to avoid as much as possible. Also, the oil crisis and the effect of the Middle East situation are playing a part in the supply chain generally. And I think it is just part of the inflationary pressures that we see popping up all around us in different areas. And we of course need to work with that and see how we can handle that from a pricing point of view and from a costing point of view as well. Looking for alternative solutions, alternative sources, etc. But in the short term, right now, we believe that it was fair to indicate that we see that pressure and that it is affecting the product cost in the quarter.

Wagner
33:43 - 33:43

Okay.

Operator
33:50 - 33:54

The next question comes from Klaus Berglund from Citi. Please go ahead.

Klaus Berglund
33:56 - 34:41

Thank you. I wonder, Peter, Klaus. So I had a question on the growth in Vacuum Technique and the capacity that you have there. Revenues were up 16% quarter-on-quarter. So we achieved another double-digit quarter-on-quarter growth. Sales are increasing into the fourth quarter, which would perhaps see 45% growth year-over-year at the exit of this year. And then on the drop-through, it was over 30%. Your message here has been that we shouldn't expect a drop-through to reach those historical levels, given the high cost for the capacity ramp. But now we have reached that point. Is that better pricing now running through the P&L on orders that you have taken before? And therefore as the capacity cost drops out, could it drop-through perhaps then reach 40% to 50% going forward? Thank you.

Peter
34:44 - 35:53

I think the capacity ramp-up is continuing as we speak and will continue in the next quarter as well. There is no doubt about it in Genesee, in the US, for example, in the third quarter, we have been able to start up gradually the production of spare parts. We intend to continue in the course of the fourth quarter with the assembly of actual pumps. That means that we are still not at full capacity there, for example, and we need to continue to ramp up as well. We also have indicated earlier that in order to become more agile in case at a certain moment in time the trend would start bending in the other direction, we are able to react a little bit better than we were able to do the last time the business went down. We are also trying to make sure that we build in some mechanisms that might be, in the short term, a little bit more costly, but in the long term, hopefully help us to be more agile. For example, regarding how we subcontract machining, we do not make the same long commitments as we used to in the past; today, we might need to pay a little bit more, but at least we hope to be more flexible when a downturn occurs at a certain moment in time.

Klaus Berglund
35:55 - 36:28

So what I meant, Peter, I didn't mean a 50% drop-through in the fourth quarter already. What I mean is, as these sort of capacity ramp-up costs are gradually dropping out, I assume that you have quite good pricing moving through the backlog right now. At least we hear that from others. So, I mean, looking at the drop-through of 33% right now, if you look into 2027, I am not sure how forward-looking you want to be, but it seems like it may improve over time as you continue to deliver.

Peter
36:28 - 37:41

I hear you, but I have two thoughts. On the one hand, pricing. Yes, of course, we are working very hard with the different customers in the segment to work on the pricing aspect, but it continues to be an extremely concentrated market segment with very strong purchasing power from the big players. And even though we have best-in-class products, we are still not alone in the market. So that means, of course, that there is still a competitive play to be made. So in the end, we are working hard on the pricing part, but it is not as evident as one maybe would assume in this strong, vibrant market. So I think that is an important component to take with you when it comes to the pricing. Then when it comes to the margin development going forward. I mean, let's say that we do believe that it should be possible to continue to see some level of margin expansion, but we wouldn't suggest that it would be similar to what we have seen in the last two quarters, depending on how things develop. So I think a little bit of caution around that margin expansion. We think there is more room, but maybe not as much as we have seen in the past few quarters.

Klaus Berglund
37:43 - 37:44

Thank you.

Peter
37:45 - 37:46

You're welcome. Klaus.

Operator
37:49 - 37:54

The next question comes from Sebastian Kwan from RBC Capital. Please go ahead.

Sebastian Kwan
37:56 - 38:26

Yeah. Thank you for taking my question. My question relates to Compressor Technique and specifically in Europe. With competition ramping up or getting more intense, do you see a price war evolving, especially for standardized compressors? Maybe you can give us an idea of what pricing is, and the mix that resulted in the negative margin effect, especially related to Europe. Thank you.

Wagner
38:26 - 39:26

So I think in Europe, what we see is the macro environment is not helping. There are definitely pockets of growth. But we have a good size in Europe. I don't see us losing market share in Europe and we have the tools to compete against the competition as well. We also have Chinese brands. Some of our Chinese brands are becoming global and they are now expanding everywhere. So I think we have the right tools to compete. I am not concerned at all when it comes to competition. I am more concerned about the macro environment. I think that is my concern. Our position is solid. That. And of course, we see the inflation like Peter already explained. That is also valid for Europe. That is not different.

Sebastian Kwan
39:29 - 39:35

Relating to the mix. What products are then creating the negative mix? Is it standardized?

Wagner
39:35 - 39:36

It is more.

Sebastian Kwan
39:37 - 39:38

Compressor.

Wagner
39:38 - 39:44

It is geography that plays a role.

Peter
39:44 - 40:17

It is also not about the deteriorating margin. It's about the fact that some products have better margins than others by default. And that is a fact. And then of course, it depends on the growth of the respective product categories. And the same is valid for the markets. Some markets are more profitable than others. And depending on how you grow in those markets, it supports or does not support the margin as much. It is more of an external factor, you could say in a way, than something that you can directly influence in that sense.

Sebastian Kwan
40:20 - 40:20

Okay. Thank you.

Peter
40:22 - 40:23

Thank you. Sebastian.

Operator
40:25 - 40:29

The next question comes from Max Yates from Morgan Stanley. Please go ahead.

Max Yates
40:31 - 41:54

Hi. Good. Good afternoon. I guess what I am trying to get to the bottom of is how to think about this compressor margin over the next couple of quarters, because you did 25.5% margins in the second half of last year. You have just reported 23.6%. When I think about some of the things that you talked about regarding cost inflation, I would think that you have relatively good pricing power, and those should be things that you should be moving on quickly to pass through to your customers. You already mentioned the FX impact has dropped out. So, I guess what I'm trying to understand is how to view the next couple of quarters as revenues grow. Should we continue to treat this compressors business as a division that will grow revenues in the top line, but margins will be down year over year because of mix or pricing actions? Should we start to think about this as a business where it will grow revenues and margins can at least be flat or even up. I guess there is a massive difference between you achieving second-half margins of, you know, 25% to 26% or 23% to 24%. So I am just trying to understand, how long will this continue? Could we be in a scenario where revenues are growing and margins are down? Because that is not a particularly good outcome for a business, even though I appreciate your margins are at very high levels and it is a very successful business.

Wagner
41:56 - 43:28

Yeah. Thank you for the question. I think, just to emphasize again, our biggest priority number one is to continue to grow the business area. Well, one thing that I want to highlight as well. We have the short cycle, and you are right, we have the short cycle, and it is where we can act a little bit faster. But we also have the long cycle in that industrial compressor bucket. And there we could have lead times of a year. So, we should also consider that there are products that we are invoicing. Now, having this effect that we have sold last year is not applicable. There is no one-size-fits-all approach here. We do have quite a lot of price activity that is definitely on the table, but of course the environment is quite inflationary. We will continue to work on our price and we will see how fast we can get that in the P&L. We cannot guarantee that next quarter is going to change, and we do not know if that trend is going to be reverted. We also have the acquisition of Eurovacuum that will come. It has a dilutive effect, but it is very important for the strategy that we want to implement. That is all. I don't know if you have any additional comment, Peter.

Peter
43:29 - 44:12

No, I think especially the fact that we have quite a significant amount of projects in our orders on hand is not more than usual, I would say. But we do have that with longer lead times. And of course, if we are confronted with inflationary effects, it becomes a little bit difficult for those specific orders to handle that from an operating margin point of view; of course, for new orders, we can implement new prices. And then, depending on the lead times, we will be able to realize those. But I think that's important to consider so that you cannot really assume a turning of the corner within a week's time, or in a quarter's time for that matter? And then on top of that, the dilutive effect of the acquisition.

Max Yates
44:13 - 44:20

But just to understand, do you not have fixed escalation clauses on some of those contracts with 6 to 12-month lead times?

Peter
44:20 - 44:39

Freight could be another particular topic. Freight could be more based on the cost of freight at the moment that the shipment is happening. That will depend on the specifics, but it is more about the actual product pricing in the contract that has been signed with the customer potentially a long time ago, as indicated.

Max Yates
44:40 - 44:42

Okay. Thank you very much.

Peter
44:42 - 44:43

Thank you. Max.

Operator
44:46 - 44:50

The next question comes from Alex Jones from BofA. Please go ahead.

Alex Jones
44:52 - 45:12

Thank you. Another question on a slightly different part of the business process. Can you just talk about the project pipeline you are seeing and how you feel about the next few quarters? I guess Q2 was exceptional, and this quarter also sounds quite strong. So should we think about this quarter being the right run rate or something between those two being the outlook for the next few quarters? Thank you.

Wagner
45:13 - 46:12

Yeah. I think we do have a strong pipeline that can be transformed into orders. So we remain positive about the environment. We are exposed to several market segments like LNG this quarter. We didn't have LNG orders coming from Korean shipyards, for instance. But Chinese shipyards did very well for us. This quarter is always a mix. Mix, but we remain positive because we are exposed. A big surprise this quarter was a heat pump for district heating, which is a quite large compressor and a very nice order. It is a nice order. So I think they are very well positioned to continue to grow. There will be variations quarter on quarter. But the environment continues to be positive for Gas and Process.

Peter
46:13 - 46:43

And referring to last quarter, I would really like to underline again the exceptional order intake for Gas and Process in Q2, with a lot of orders coming in at the same time, like we have seen in other quarters in the past years. So I think it is a bit tricky to use that as a reference quarter or to put that into the mix to calculate an average. I think that is probably the absolute record quarter that you are then including in your calculation. And that would probably be a little bit too much.

Alex Jones
46:46 - 46:46

Thank you.

Peter
46:48 - 46:48

You're welcome.

Operator
46:52 - 46:55

The next question comes from Timothy Lee from Barclays. Please go ahead.

Timothy Lee
46:57 - 47:40

Hi. Thanks for taking my question. I would like to ask about order intake. So, what is the lead time for this? At this point in time, and in terms of the customer activities, how do you see the behavior changing? I think in the last quarter, you mentioned that there were some elements of pre-ordering; how does the situation look like this quarter? And what should be the right level of orders that we should think about in the next couple of quarters, as long as the year-on-year growth is already high. So the comps could be difficult, but what should we be expecting? What should we be expecting in the next couple of quarters? Thank you.

Wagner
47:42 - 48:55

Talking about the order levels, we saw a little bit more pre-ordering this quarter. That is fair to consider for some key accounts, especially the vacuum equipment where we sell to some process OEMs. We saw a little bit more pre-ordering as they want to really secure their production capacity. I think it's fair to say that we saw that in this quarter. What we see now with the semiconductor customers is that the biggest priority is focusing on output. And I think the biggest discussions between ourselves and our customers is output. I am not entirely sure if they will focus too much on placing orders, because they have already done quite a lot in Q3. I am not saying that it is going to be good or bad. Q4, but I think the focus from our side, and we feel the same from our customers, is to get the output.

Peter
48:56 - 49:25

And then when it comes to lead times, if I may add, Wagner, I think typically we would talk about 3 to 6 months. But now, given the amount of orders in the pipeline, this might be a little bit longer. But I think in the end, what matters, of course, is that we continue to be better than our competitors at delivering the products to our customers. And I think that will help us to build out market share in the market. So I think.

Wagner
49:25 - 49:35

And on that, Peter, I must say, I feel quite confident that we are in a very strong position to have a very competitive lead time.

Timothy Lee
49:41 - 49:41

Thank you.

Operator
49:47 - 49:51

The next question comes from Edward Hussey from UBS. Please go ahead.

Edward Hussey
49:53 - 50:25

Hi there. Thanks for taking my questions. I have two questions, if I may. So, just sticking to Vacuum Technique for a second. I mean, you mentioned that the demand growth is pretty broad-based from a regional perspective. I am just wondering, going forward, are you anticipating faster growth in the US compared to Asia? And then could you also talk through your competitive positioning in the US relative to Asia within semiconductor vacuums? Maybe just start off with that one, actually.

Wagner
50:27 - 52:07

Yeah. We are in a strong position in Asia. And when I talk about Asia, I'm also including China. They are very competitive in both Asia and North America, and we remain quite positive. I would say there are new players in the market. I will not mention them geographically, but we are in touch with any new player. New players in process tools are emerging in some developing and new countries. So I think we are really present in everything that is going on around semiconductor vacuum. I feel quite confident, which does not mean we will get all the market share from these new players, but we are in a solid position because if you look, I can say with a good level of confidence that we have the highest capacity of dry vacuum pump production. We are scaling up and we are prepared to do more if we feel that the market demand will continue or increase. So I think we have the highest capacity, we are increasing and we are analyzing the market. If we feel the need, if new players emerge and they require more. We will be prepared for that. I think that is for me the most important, and I feel quite confident about that.

Peter
52:08 - 52:23

And I think also supported by a super strong geographical local-for-local setup across the different continents, I think is an absolute strong argument for our customers to work together with us.

Edward Hussey
52:24 - 52:53

Okay. Thank you. And then also, you mentioned pricing being relatively tricky given the population of customers and their higher pricing power. But I guess compared to previous cycles, are the pricing discussions getting easier given that vacuum as a total percentage of wafer fab equipment spend is actually shrinking. So, relative to the entire semi CapEx, it is becoming a smaller and smaller fraction. So arguably, it could become easier over time.

Wagner
52:55 - 53:29

Yeah. I would say that, when it comes to price, I think Peter already gave quite a lot of information. The only comment I want to add is that there are a lot of activities ongoing, even if they are big players. We also have agreements, and the agreements expire at different dates. So we have a lot of activity ongoing to reach better price levels. And that will come step by step because of the agreements in place.

Edward Hussey
53:32 - 53:33

Okay. Very clear. Thank you.

Peter
53:38 - 53:39

We have time for one last question.

Operator
53:39 - 53:43

I believe the next question comes from John Kim from Deutsche Bank. Please go ahead.

John Kim
53:45 - 54:05

Hi. Good afternoon. I'm wondering if we could focus down into Vacuum Technique for a moment. Do you have any sense, given the strong demand and order intake the last few quarters? How much is going to the creation of new facilities or fabs versus better activity levels and more production at existing customers or sites?

Wagner
54:05 - 55:29

No, it is a bit difficult for us to say, but we know how they operate in this market. First, they build what I call the vessel, the premises and everything, the utilities, but not the process tools and not the vacuum pumps. They first ordered the process tools, and the vacuum pumps will come later. What we see is a bit of a mix. There is a lot of population of existing fabs that were built, for instance, last year. Now they are populating with process tools and then they require our vacuum systems. So, we also see new announcements and new players that might come into the market as well, and we are also involved in those. But I don't have an exact figure to tell you how much is going to greenfields or extending new facilities; that number I don't have because I see both in our figures, both new fab extensions and new fabs. And there are quite a lot of announcements already regarding new players in which we will also be participating.

John Kim
55:32 - 55:33

Okay. Thank you.

Peter
55:34 - 55:53

Okay. Thank you, John. We believe that with that, we have come to the end of our earnings call for the third quarter 2026. Again, I would like to thank all of you for your attention, for your active participation, and for your questions. And we look forward to meeting you in the coming months. On the road. Thank you. Goodbye.

Katso webcast
Revenio Group Oyj, Q3'26
Kieli: englanti12.11.2026 klo 13.00
Jukka Kainulainen Good afternoon, and welcome to the Revenio Group Corporation Q3 Earnings Call. My name is Jouni Toijala. I am the CEO. And then, again today we have Jukka Kainulainen, our CFO, on th…
Kamux, Q3'26
Kieli: englanti12.11.2026 klo 9.00
Katerina Heterant Good morning. Welcome to the Kamux Q3 results presentation. My name is Katerina Heterant and I am Head of Investor Relations at Kamux. Today we shall go through the Q3 results presen…
Koskisen, Webcast, Q3'26
Kieli: suomi12.11.2026 klo 8.00
Jukka Pahta Hyvää huomenta ja tervetuloa tähän osavuosikatsaustilaisuuteen! Koskisen tammi–syyskuun osavuosikatsaustilaisuuteen lähdetään otsikolla: Koskisen liikevaihdon kasvu jatkui. Kohonneet kusta…
Reaktor, Q3'26
Kieli: suomi11.11.2026 klo 9.00
Pekka Horo Oikein hyvää aamupäivää kaikille ja tervetuloa tähän meidän webcastiimme. Olen Pekka Horo, Reaktorin toimitusjohtaja, ja kanssani täällä on tänään Antti Akkanen, joka aloitti lokakuussa Rea…
Savox, Q3'26
Kieli: englanti10.11.2026 klo 11.00
Paulina Tanila Our speakers today are CEO Jerry Kettunen and CFO Juha Järvi. Jerry will give an overview of Savox as a company and go through the highlights of the quarter. After that, Juha will conti…
Raisio Oyj, Webcast, Q3'26
Kieli: suomi10.11.2026 klo 10.00
Elli Siltala Hyvää marraskuista päivää Raisiosta! Ja tervetuloa Raision tammi-syyskuun 2026 osavuosikatsauksen webcastiin! Pahoittelut pienistä teknisistä haasteista, mitä meillä oli tässä alussa. Min…
Mandatum Oyj, Audiocast, Q3'26
Kieli: englanti10.11.2026 klo 9.00
Lotta Borgström Good morning, everyone, and welcome to the Mandatum Q3 2026 audiocast. My name is Lotta Borgström from Investor Relations. Joining me today are our CEO, Petri Niemisvirta, and our CFO,…
Solar foods Go-to-market Update
Kieli: englanti9.11.2026 klo 12.00
Maria Hello everyone, and welcome to the Solar Foods go-to-market update. My name is Maria and I'm here today with our CEO, Rami Jokela, and CFO and Deputy CEO, Ilkka Saura. Also with us today is Heli…
Outokumpu, Webcast, Q3'26
Kieli: englanti6.11.2026 klo 12.30
Johan Welcome to the third quarter results webcast. I am responsible for investor relations. We will start with the presentation from our CEO, Kati ter Horst, and our CFO, Marc-Simon Schaar. After the…
Endomines, Webcast, Q3'26
Kieli: englanti5.11.2026 klo 13.00
Andy Turpin Hello, everyone, and welcome to Endomines' third-quarter results webcast. Thanks for joining us today. My name is Andy Turpin and I am the Chief Communications Officer here at Endomines. A…
Lemonsoft Oyj, Q3'26 webcast
Kieli: englanti5.11.2026 klo 11.00
Unknown 1 Welcome to the Lemonsoft Q3 results presentation. We will start with the presentation from CEO Alpo Luostarinen, followed by the Q&A. You can send your questions throughout the event via the…
Enersense, Webcast, Q3'26
Kieli: englanti5.11.2026 klo 10.30
Liisa Tamminen Hello and welcome to the Enersense Q3 2026 results webcast. My name is Liisa Tamminen from Enersense Investor Relations. And with me here I have our CEO, Kari Sundbäck, and CFO, Jan-Elo…
Sitowise, Q3'26
Kieli: englanti5.11.2026 klo 10.00
Mari Reponen Good day everyone, and welcome to the Sitowise Q3 2026 results audiocast. My name is Mari Reponen, and I am responsible for strategy and IR here at Sitowise. And today with me are our act…
Orthex, Webcast, Q3'26
Kieli: englanti5.11.2026 klo 9.00
Alexander Rosenlew Good morning and welcome to the Orthex Interim Report. My name is Alexander Rosenlew and with me I have Saara Mäkelä, CFO, and Hanna Kukkonen, our CMSO. We will take you through the…
Suominen Oyj, Q3'26
Kieli: englanti5.11.2026 klo 8.30
Anni Luoma Good morning, everyone, and welcome to the Suominen Q3 webcast. My name is Anni Luoma. I am the Manager of External Communications and Investor Relations at Suominen. Here with me are our P…
Lumo, Webcast, Q3'26
Kieli: englanti5.11.2026 klo 8.00
Niina Saarto Good morning, all. Welcome. This is Lumo Homes plc's third quarter result webcast. I am Niina Saarto from Treasury and Investor Relations. Today I have two gentlemen here with me, namely…
CapMan, Webcast, Q3'26
Kieli: englanti5.11.2026 klo 7.30
Charlotte Good morning and welcome to this presentation of CapMan. Q3 2026 interim report. Presenting today we have Pia Kåll, CEO of CapMan. And after the presentation, we will have a Q&A session. You…
Marimekko, Webcast, Q3'26
Kieli: englanti4.11.2026 klo 12.00
Anna Good afternoon. My name is Anna and I am the IRO of Marimekko. It is my pleasure to welcome you to our Q3 webcast. With me, I have our president and CEO, Tiina Alahuhta, who will walk you through…
Administer, Webcast, Q3'26
Kieli: suomi4.11.2026 klo 9.00
Kimmo Herranen Welcome to the Administer Q3 2026 interim report. Results. Meillä on se alkaa. I am Kimmo Herranen. Kalle Lehtonen. Also. Kaarina og. Yelken. Kalle Lehtonen En el coco. Madan. Parannus.…
Kempower, Webcast, Q3'26
Kieli: englanti4.11.2026 klo 8.30
Unknown 1 Powering the planet. Kempower. We charge our planet for the better. By powering the electric movement. We enable quick and scalable EV charging solutions for everyone and everywhere. We ma…