Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Hello, everyone, and welcome to the Addnode Group Interim Report presentation for Q3 2026. I am Johan Andersson, CEO of Addnode Group. And with me, I also have our CFO, Kristina Elfström Mackintosh. Today we are going to talk about our third quarter 2026. We will provide an introduction to that and some further clarity. And then we'll end up with a Q&A. You will also see some supporting slides in the appendix. For those of you who are new to Addnode Group, I would like to start with a short intro. We provide software and digital solutions in selected niches. Our 20 companies are organized in three divisions in order to support each other and take advantage of synergies. The three divisions are Process Management, Product Lifecycle Management, and Design Management. Our software and digital solutions help build a more sustainable and efficient society. From zoning and planning and building permit software for the public sector in the Process Management division to digital solutions for designing, building, and managing infrastructure and products, including lifecycle management in our Design Management and PLM divisions, we are building Addnode Group on three competitive strengths: our domain expertise in selected niches, that we provide mission-critical software with high switching costs, and that we are the trusted partner to our customers. Addnode Group has about 40,000 customers. Net sales of 6 billion SEK. A business model with 62% recurring revenue. And we have a healthy EBITA margin of around 16%. We are active on five continents. The majority of our business is in Northern Europe and North America. And we have done 96 acquisitions since the inception of Addnode Group in 2003. So, let's look at the third quarter performance. Q3. We had organic growth, acquisitions, and cost efficiency initiatives that contributed to significantly improved earnings in the third quarter. Net sales increased by 10%, of which 3% was organic growth adjusted for positive currency effects. EBITA increased by 68% to 250 million SEK. All three divisions improved EBITA, which supported the improvement of the EBITA margin to 17.4%. Operating cash flow improved by 73 million. Please observe that the third quarter is the lowest quarter of the year, as we receive most of our prepayments in Q4 and Q1. We also secured the largest single contract for our own software in Addnode Group's history. In the quarter, we acquired SpaceIntel, an AI-enabled software for facility management, and increased our investments in Bimify and InUse. When comparing with last year's Q3 in 2025. Please observe that renewals of some Autodesk agreements were made by customers in the second quarter instead of as expected in Q3. This boosted Q2 last year by roughly 80 million in net sales, with the corresponding negative effect in Q3 last year resulting in a zero effect for the full year. So it was just a timing difference between the quarters. But as you can see in the graph to the right, showing net sales and EBITA from 2021 to rolling year-to-date 2026. Addnode Group is now back to year-on-year growth for both net sales and EBITA; rolling 12-month year-to-date net sales were almost 6 billion and EBITA was 970 million. I will now move to the performance of our three divisions. For those of you who follow Addnode Group regularly. We usually start with Design Management, but today I am going to start with Process Management to the left. Net sales increased by 6% to 417 million. Organic growth increased by 4%. As I described earlier. Sokigo, a company in the division Process Management, secured a strategic contract when the City of Stockholm selected our standard solution for building permit management. The contract has a total order value of roughly 100 million SEK over a period of ten years. It confirms the division's strong market position. EBITA for the division increased by 16% to 100 million and EBITA margin increased to 24%. Acquisitions and improved operational efficiency contributed to the improved margin. The EBITDA margin has improved for the ninth consecutive quarter, demonstrating the division's ability to combine both growth with increased profitability. And now, the Design Management division in the middle of the slide. Net sales increased by 21% to 595 million. Demand for both software and services remains strong in the US, where investments in data centers are a key driver of growth. The comparative figure for the preceding year, as mentioned, was impacted by the timing of renewals of Autodesk agreements. EBITA increased by 184% to 122 million, and EBITA margin increased to 20.5%. The improvement in EBITA was driven by a combination of easier comps as described, organic growth, acquisitions, and efficiency measures implemented in both Europe and the US. The efficiency program that started in the second quarter has been completed. It will reduce the cost base by about 100 million on an annual basis, with about half of that reduction expected to take effect in the second half of this year, and the other half in the first half of 2027. And finally, the Product Lifecycle Management division. Net sales were unchanged at 436 million. Organic growth decreased by 3%. Strategically important customer segments, such as aerospace and defense, remained in strong demand. We had a solid quarter for the Nordics, Benelux, and the United States. The German market is still stagnant. EBITA in the division increased by 10% to 46 million SEK and the EBITA margin increased to 10.6%. We have a clear focus for the division to improve margins. This has been successful and we have improved EBITA. For example, you can see that the number of full-time employees is 14% lower compared with Q3 last year. The aerospace and defense industry is an increasingly important growth market for the division, where technical, deep domain expertise, a comprehensive offering, and global service capabilities position us strongly to capture these expanding opportunities. And we are diversifying in Germany from automotive to aerospace and defense and other customer segments. And just to stop for a few seconds, I mentioned this record deal with the City of Stockholm valued at 100 million. It is a clear testament that our customers are investing in software that we can support over time. It is our largest owned software deal for the year. It also manifests the strong position that we have in the market for the public sector and the technical part of municipalities in Sweden. It's also something that adds to our base of recurring revenue as this is a ten-year contract, meaning that we will have recurring revenue of roughly 10 million from this contract for the next ten years. So I think it's a good testament to the good work and the market position that we have in the division, Process Management. So we also made some investments in the quarter. We are investing in technology and AI to leverage our global market position. We have made some acquisitions in the Design Management division, where we acquired SpaceIntel in the quarter. It is an AI-enabled software platform for facility management. And we also increased our investments in Bimify and InUse. And in the beginning of the year, some of you might remember that we acquired a company called CAD-plus. Together, these investments provide us with innovative solutions for the digitalization of buildings, smart property management, and connected industrial environments. By combining these companies' technologies with the Design Management division's strong market position, extensive customer base, and global sales organization, we have a good foundation to accelerate market penetration and boost our recurring revenue. A concrete example of how we can already see the value of these investments is our solution for Technology University Dublin. And that is my segue to our customer success stories for this quarter. The first example to the left in this slide is the one that I just mentioned. It shows how Symetri in Design Management is supporting the Technological University Dublin. The University wants to create a scalable digital foundation for its campus operations and support its 2030 sustainability targets. We did that by bringing it all together in Symetri's Geminus platform, integrating facilities management systems, BIM, digital twins, IoT, and other data sources into an AI-powered environment that automates monitoring, reporting, and building performance optimization. This enabled the Technology University Dublin (TU Dublin) to optimize campus performance, support sustainability, and track decarbonisation progress. It is a good example of how our industry knowledge and domain expertise, combined with AI and integrated data sources, can create new opportunities to improve efficiency and further develop customer operations. The second example, as you can see in the middle of this slide, comes from Technia in Division Product Lifecycle Management. As ELECTRON Aerospace prepared for certified production of its electric aircraft, it needed a scalable, cloud-based PLM environment to manage growing engineering and certification complexity. We supported ELECTRON Aerospace by deploying the 3DEXPERIENCE platform in the public cloud, unifying design, simulation, product data, and technical documentation into a single source of truth. This gave ELECTRON Aerospace a digital foundation to improve collaboration, reduce rework, and accelerate certification and aircraft development. The last example comes from Decerno in Division Process Management. They have been working with Fastighetsbyrån for a long time, helping them and supporting them. It's a long-standing customer relationship, but they wanted to evolve their intranet into a central knowledge hub to improve access to information on sales, administration, and legal processes for employees. We developed a solution in Sweden called Byråassistenten to act as an intelligent assistant. It is an AI-powered intranet assistant that delivers relevant answers and source-backed information through intelligent search and generative AI. This enabled Fastighetsbyrån employees faster access to trusted knowledge while providing Fastighetsbyrån with a scalable AI platform for future growth. These examples. These three examples reflect a broader trend across our business. Customers continue to invest in solutions that improve efficiency, increase transparency, and support long-term growth and strong customer relationships. Deep domain expertise and the data embedded in our solutions position us to develop and deliver new AI-enabled solutions for our customers. So I would like to hand over to our CFO, who will bring further clarity on the Q3 results.
Thank you, Johan. I am now going to take you through the development of net sales from Q3 2025 to Q3 2026. And you can see here on the graph that the Q3 2026 net sales amounted to just over 1.4 billion SEK, compared to just over 1.3 billion SEK last year. That is a total increase of approximately 10%. And this growth is coming from organic sources. The currency-adjusted organic growth was 42 million SEK, which was an increase of 3%. The increase is mainly derived from Division Design Management. And as you already pointed out, net sales in the comparable period were impacted by early renewals. Decerno contributed 6 to 8 million SEK, which is a growth of approximately 5%. We had positive currency effects in the quarter of about 17 million SEK, and that is mainly relating to both the Norwegian krone and the US dollar. And we also have another way of presenting the net sales growth from the divisions, which is the next slide. This slide illustrates the division's contribution to net sales growth during the quarter. Looking at Design Management, it contributed 105 million SEK, which is up 21% in total compared to last year. It is also worth noting that the prior year comparison was affected by the early contract renewals that we talked about. PLM contributed 1 million SEK, which is in line with last year's net sales. And here we have a positive currency effect of 2 million SEK. So the organic growth was -3%. Process Management contributed 22 million SEK, which is a growth of 6% compared to last year. And here we have a positive effect of 7 million SEK. And therefore, the currency-adjusted organic growth was 4%. Now I'm going to talk a little bit about the net sales by category. In this graph, we are presenting the net sales by category. We emphasize that our offering consists of mission-critical digital solutions and deep domain expertise with a strong and recurring customer base, which reflects high customer retention. The majority of our net sales, as seen in the graph, represent just over 60% of own software and services, reflecting the value we bring to our customers. Our strategy remains focused on profitable, organic growth supported by innovation, customer value, and a strong recurring base. Over the last 12 months, recurring revenue represents 62% of our net sales. I will now move to the next part of the presentation regarding the EBITA development from last year to this year. This bridge illustrates how we have delivered profitable growth in the quarter. We continue to drive growth through innovation, customer value, and a growing share of recurring revenue, while at the same time improving operational efficiency across the group. EBITA amounted to 250 million SEK this quarter, compared to 149 million SEK in the same quarter last year. The increase is approximately 68%. And as a reminder also, the. The EBITA was 149 million SEK. The comparison quarter was impacted by the contract renewals we previously discussed. Even taking this into account, the quarter reflects improved underlying profitability, supported by operational efficiency, restructuring initiatives, and disciplined execution across the businesses. Let me take you through the EBITA development in the quarter. The Design Management division was the main contributor. About 79 million SEK of EBITA was up 184% compared to last year's Q3. The restructuring program that was initiated in Q2 has now been implemented. We are starting to see the benefits of this coming through, and PLM contributed 5 million SEK in EBITA. As you remember from the last slide, net sales were almost flat year-on-year, but EBITA increased by 10%, which was supported by the restructuring actions we implemented last year, primarily in Germany. Looking at Process Management, it contributed 14 million SEK of EBITA. That is an increase of 16% compared to last year. So overall, the EBITA improvement reflects our focus on profitable growth. While growth levels vary across the divisions, we continue to strengthen profitability through operational improvements, recurring revenue, and a disciplined execution of our efficiency programs. Looking at our strong operational performance. We grew our EBITA margin from 11.4% to 17.4% in the quarter. Now let's have a look at the cash flow. Starting with the cash flow from operating activities, the quarter improved by 73 million, which is mainly driven by higher operating profits. If you look at the year-over-year cash flow from operating activities, the increase was significantly based on improved working capital investments during the quarter, mainly related to software development and also M&A-related payments. And these investments in last year's Q3 included the acquisitions of the Norwegian company and the Brazilian company, while financing activities in Q3 included new loans for financing settlements of earnouts that are falling due in Q4. And now I would like to hand over back to you for the outlook and focus.
Thank you. Kristina. As you know, our financial target is to improve our EBITA by 15% year over year over time. If you look at the graph here, you can see from 2016 to 2026 rolling 12 months, the compounded annual growth rate is 20%. Our business model is based on a strong combination of organic growth, value-accretive acquisitions, recurring revenue, and constant improvement. We work constantly to boost efficiency and the profitability of our companies. Our focus is on increasing customer value through AI-driven organic growth. Increase recurring revenue. And at the same time, we continue to enhance our operational efficiency and execute value-accretive acquisitions. As you know, our comparability between peers is affected by the renewal cycle of three-year Autodesk contracts. The cycle has been negative for reported net sales for 2026. We would like to highlight the three-year cycle, meaning that we expect more three-year contracts to be renewed in 2027 compared to 2026. This will support continued organic growth. We have proved that we can double our EBITA every five years, and we are going to continue that journey. Addnode Group is well positioned for continued growth, supporting our 40,000 customers. With that, I would like to open up for Q&A.
If you wish to ask a question, please dial star five on your telephone keypad to enter the queue. If you wish to withdraw your question, please dial pound key six on your telephone keypad.
Okay, great, I will take a few of my questions then, I guess. So. Regarding Design Management, perhaps I was a bit too defensive in my estimates, but I didn't expect the cost savings to impact this significantly this early, or is it driving the quarter-over-quarter improvement?
No. No, I would not say that there are any extraordinary things. We have growth in the quarter. That helps. And you have to remember that with the new business model, we have 100% gross profit on our Autodesk sales. We also had strong software sales supporting it as well, which you can see described in the Interim Report. So it's more of an operational performance and cost savings and a combination of that.
Okay. I see. Great. And you mentioned strong demand from data center build-outs. Could you give us a rough number regarding Design Management exposure to data centers?
Uh, no. No. We don't have any exact numbers for it. Yeah. Okay. Yeah. What we mean by exposure to data centers is that these are buildings and infrastructures, and that is what we support with our software. Our customers are the architects or the technical consultants who are involved in the construction, but also the owners of the data centers who want our help with structuring the data so they can build a digital model and have good maintenance of that over time. So it is both services and software that we are exposed to. So it is a broad definition. It's both to our existing customers who are supporting the build-out of the data centers and the new customers. Who are the owners there, the hyperscalers.
Okay, I see. Thanks. And regarding the margin in Process Management, I think it is the highest level seen in the last ten years at least. Was it an exceptional quarter, or should we expect the rolling 12 months margin to continue to expand?
I think it's a very strong quarter supported by the acquisitions, where we have good utilization in our business and strong execution. So I think this is a good margin that we hope to maintain. But I cannot promise you that we can continue the journey on a sequential basis. So it's more that we're hoping to keep this margin as we move forward and hopefully we can do a little bit better, but I think it will be tough to maintain the trajectory quarter over quarter. We can still do a little bit better, but it will not be plus 1%, plus 1%, plus 1%. That will be tough.
Okay. That is fair. And one last question from me. I mean, the news regarding the automotive sector is still quite negative. As far as I remember. Your exposure in Sweden is limited. But regarding the German market, are things getting worse or is it rather stable at a low level?
I think it is the latter. We are still doing business with them and they are actually buying from us. But it is stable on a low level; I think that's the best way to describe it. And that is in line with our earnings there. So I think we have solid margins in our business that we are executing in Germany right now.
Okay. That is great. Thank you very much. That is all for me.
Thank you. Predict.
The next question comes from Daniel Thorson from ABG Sundal Collier. Please go ahead.
Yes. Thank you very much. I'll start off with one on the Design Management division here. And as you said, you expect a higher share of three-year deals in 2027 and 2026, supporting organic growth. Do you also assume anything on kickback levels potentially changing, or are they already set for 2027 in that assumption?
Thank you for the question. Yes, we expect the support to continue into 2027. We still have a fourth quarter left here in 2026. So, I just want to remind you that I am talking about 2027, 2026, and the fourth quarter. We expect that we will be on par with what we delivered last year. And Design Management is expected to deliver that. We had a very strong quarter last year with new sales in that. So I just want to point that out. And then with regards to Autodesk and margins. Our expectation is that the setup we have this year will be valid for 2027 as well. So no changes in that.
Okay. Is that because you know it will be the case or is it because you assume that it will be the case next year?
We have been informed that that is what to expect.
Okay. Thank you. And then, secondly, on Process Management here as well, in line with Fredrik's question on the margins, regarding the 100 million SEK contract with the City of Stockholm in Q3. Did that include any upfront license or implementation work? Is it worth highlighting as a driver for the strong margin in the quarter, or is it just recurring revenue?
Is the effect of that contract the reason for the strong margin? You will probably see more of the project's impact, if any, which will be more acute. So it is not the case that the explanation for the strong Q3 lies in that contract. It's more that we will get a ten-year, 10 million recurring revenue stream, and there will be some services in the beginning, as is always the case with implementation, but that is a small part of the total value, as this is actually a standard software that we deliver to the Swedish municipality market.
Okay, perfect. That's clear. Finally, on Q4, you touched upon it already, but you have said that a more flattish development organically year over year is reasonable. And the cost program realizing in Design Management here already in Q3 and the record margin in Process Management. Is this enough to drive a positive EBITA growth year over year despite, for example, a flat organic sales growth in Q4?
There is room for that, as you said with regards to the flat organic growth that we could expect as best in Design Management; there is room for that. Yes.
Okay. Perfect. Thank you.
The next question comes from Eric Larsen from CIB. Please go ahead.
Thank you. I just have one question on cash flow. We have seen some improvements here for about a year, in line with what you said at the beginning of this transition. So when we conclude Q4, would you say that we are done with this transition? And are these all Autodesk licenses paid on a yearly basis now, or is there any fee or product that could still allow you to receive payments three years upfront? Or is that door completely shut now?
Yes. Thank you. Eric. Just to remind the rest of the audience, this is really related to the period before when we were considered as selling Autodesk contracts to the customer, and then we would receive a supplier invoice from Autodesk that has mainly gone through the balance sheet as of now. And it was mainly coming from the United States and from Europe for this in Design Management, Symetri. And we see that that liability is almost all out now. Very minor on the balance sheet. So. As you also mentioned, Q3 is normally the lowest quarter for our cash flow from operations. And that is because of the maintenance agreements that we normally invoice in Q4 and also in Q1. We are pleased to have gone through that whole cycle regarding the Autodesk contracts and are returning to a more stable cash flow situation.
All right. Great. Thank you.
The next question comes from Frederic Lithell from Handelsbanken. Please go ahead.
Thank you very much. I will start with one question on the three-year contract comment regarding 2027. Then, I mean, we have over the last year talked about three-year contracts and where customers have moved from three-year to one-year contracts because they haven't really had discounts on the Autodesk side there. So what makes you optimistic that they will renew a three-year contract into a new three-year contract? contracts in 2027? Is the discount that Autodesk had back, or is it anything like that?
Oh thank you for the question. No, to be clear, it has nothing to do with discounts. There are no discounts available for choosing any type of contract. What we have is that one third of the total bulk of our three-year contracts that we have signed with our customers that are active today has been on a more preferable plan for the customers, and that plan ends in 2028. So that means that we have less than three years left until 2028, so they cannot renew on that preferable plan. But they want to stay on that plan. So they renew for one year. So that means that for one third of our three-year contracts, it makes more sense for the customers to renew as a one-year contract to stay on that plan. So that means that we know how many three-year contracts we have. And we know the cyclicality of that. And you remember the three-year duration of that. So then we can see how many contracts will be renewed in 2028. We know from historical patterns how many contracts are expected to renew. With that as a basis, we feel comfortable saying that we will have organic growth in that business if we have normal business conditions, as we do today, that has nothing to do with any new sales or renewals. It is more about what we can see in the contract base and what is expected to be renewed based on historical patterns.
Okay, that is it for me. So thank you for that. Just a few housekeeping items. Also, did the efficiency program that you implemented in Q3 drive any redundancy costs that are treated as items in the quarter or anything like that? Did that drive any redundancy costs that are treated as items affecting comparability in the quarter or anything like that?
Yeah. Thank you for the question. And we presented last quarter in Q2 the amount that was relating to the restructuring program, and that was taken in Q2 already.
Okay. All right. And then a final one, just also housekeeping, the revaluation of contingent considerations for the quarter. Could you elaborate a little bit on what drove that figure?
Yes, yes. What we do normally every quarter is we look at the earnout restructuring, and we have over 500 million in earnouts on the balance sheet. And we perform that revaluation on a quarterly basis. And you will see this effect normally quarter by quarter. So it is not a major impact on the current profit and loss.
Okay. Perfect. Thank you very much.
As a reminder, if you wish to ask a question, please dial the pound key on your telephone keypad.
Great. Thank you all for your patience with the Q&A session. Apologies for the technical issues, but there were some great questions nonetheless. I know we all have a busy day, so thank you all. Thank you.



















