Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
We are here to face the industry's toughest challenges together with our customers. Deep mining. From up here, the earth looks calm, but the future is hungry. It demands more copper for electrification, more gold for a store of value in an uncertain world, more iron for a new era of infrastructure and investments, and more minerals for what comes next. Let's go deep down into our world where we offer safety, productivity, and value at scale. Where the biggest challenges have been met, solved, and mastered. But we don't stop. We move past the familiar. Deeper and deeper down here, the rules begin to change. Rock stress builds in silence. And then the heat arrives. And air becomes something you have to fight for. Every breath and every meter costs. At this depth. We solve challenges together. We are Epiroc. We are Epiroc. A very warm welcome to the Epiroc Capital Markets Day 2026 here in Örebro. I'm very glad to see so many familiar faces in the crowd, but also many new ones. And to those of you watching the webcast, a warm welcome to you as well.
And for those of you who made an early trip this morning, we promise it will be worth it.
Yes. So if you don't know me, my name is Karin Larsson and I work with Investor Relations and Media here at Epiroc. And by my side, I have Alexander Apell, Investor Relations Officer.
Next slide. So as you can see on this slide, Karin and myself have more than 20 years in the group and on the stage today, we have almost 120 years of experience within the group.
That is impressive. And before we go into the content, one thing we always emphasize here at Epiroc is safety. So this is not just a slide for us. This is how we operate every single day.
And today here in Örebro, we have safety emergency exits there, there, and over there. We also have medically trained staff in case of an emergency. Yes.
So, for the agenda, we will start with our CEO, Helena Hedblom, and she will walk you through the group strategy, how we create value, and where we are heading. Then Håkan Folin, our CFO, will take you through the financials and how our strategy translates into performance and cash flow. Then we take a short break.
And after the break, we will go deeper into the business. First, Equipment & Service with Jess Kindler, then Tools & Attachments with José Manuel Sanchez. And we will, of course, leave plenty of time for questions that you can ask online throughout the presentation. We will, however, prioritize questions in the room.
Yes. Once we are done with the presentations and the Q&A, we will head to dinner, but you may first go to the hotel to drop off your luggage if you need to. You may leave any luggage here if you need to. And then we will walk jointly to the dinner location.
So if today will be repeating strategy, tomorrow will be all about creating memories.
Yes, today is nice, but tomorrow will be much better. Tomorrow is really when you get to experience Epiroc. Really? We will pick you up at 07:30. Be on time and bring your luggage, as we will be departing shortly. It is not about seeing tomorrow. It is about engaging. And you will have opportunities for hands-on challenges where you can interact with our employees and our equipment. So you will feel the performance yourself.
So, buses tomorrow after the tour will depart at 14:45 and 16:45, taking you back either to Stockholm, Arlanda, or to Eskilstuna to participate in the Volvo Capital Markets Day. You can find the details in your calendar. So it's time to welcome our first speaker on stage, our CEO, Helena Hedblom. She has more than 26 years in the group. She started out within innovation and rock drilling tools and has spent her whole career in the group. She knows our customers very well.
She has been traveling the world to see customers for decades. But the thing is, today with technology, customers are never far away. So, during the presentations today, you will see a lot of interaction between Liliana and our customers in small films. And we really hope that you enjoy them.
Because at the end of the day, everything we will show you today comes down to one thing: how we create value for our customers and how that translates into long-term profitable growth for you, our shareholders.
Yes. Thank you, Iliana. The stage is yours.
Thank you so much. And also from my side, a warm welcome to Örebro. It's great to have you all here. I have been in this industry for 26 years and also in this company. We always start with safety. And I would like to start with an accident that happened in Canada last summer. Three miners were trapped roughly 300 meters underground, and within 24 hours, we managed to bring our remote system and mounted it on a non-Epiroc loader, and that loader, after roughly 60 hours, managed to rescue these three workers. And I think this is a story not only about us as a company. For us as a company, safety is not just a slogan. Safety is real. It also tells the value of OEM-agnostic solutions when it matters the most. Because at the end of the day, the most important thing that comes out of a mine is the miner. So, who is Epiroc? I usually say we are a 153-year-old startup. We are a leading productivity and sustainability partner for the mining and infrastructure industries across the globe. We have a strong focus on innovation and that has kept us in this leading position for so many years. We have a resilient, strong aftermarket business, representing roughly two-thirds of our revenues, and that provides recurring income over a cycle. We have customers in 150 countries. We will today also talk about our footprint and how we serve these customers across the globe. But it is a very diversified customer base with stable and solid margins. And we have 19,000 passionate employees, many of whom have been with us for a long time, especially in leading positions. We have 20 plus years in the company. And you will meet my colleagues later during the day. But we have this decentralized organization model that has been supporting us over the years, with the person closest to the problem solving it the fastest way. So if we then look at our performance, we have, since the listing, been delivering 16.9% CAGR in total shareholder return. We have been growing 8% in revenue since the listing and also 8% in adjusted EBIT with an industry-best margin. And if we look at our financial goals, we have a goal to grow 8% over a cycle. Roughly two-thirds of that growth should come from organic growth, and roughly one-third from acquired growth. We target to have an industry-best margin and resilience in that margin over the cycle, to have long-term stable and rising dividends—over 50% of net profit—and to have an efficient capital structure and to continuously work on improving our capital efficiency. And Håkan will talk more later on the financial performance. But when I look at our performance over the last ten years, and especially since the listing, it is good to see that we have delivered upon our ambition and our goals. If we then talk about sustainability and our goals for both people and the planet, we have ambitious targets in place. And if we look at the progress, we have good progress towards the 2030 goals. In some areas, I would say the areas that we control ourselves—if we take CO2 emissions from operations, for example, or compliance, or building a fossil-free assortment—we have very strong achievements. achievements. Year to date, we also have good progress when it comes to diversity and safety. But there are always more things we need to do and we continue to do that. Where we need to push even more in the coming years is also to roll out the emission-free products to our customers, and we will talk more about that, of course, during the day. Our strategy for profitable growth is simple. You have seen this picture before, for those of you who have followed us over the years. We focus on attractive niches where we can outperform. Very strong focus on being that technology leader, pushing the boundaries, focus on growing the aftermarket, operational excellence, and then the foundation being sustainability and our strong corporate culture built on a decentralized model. And our strategy is also our investment case. So, we focus on the niches where there is a healthy underlying trend for growth. We focus on innovation in the areas where we can accelerate productivity or sustainability for our customers. The more aftermarket we have, the more recurring revenue streams we have, and the less dependent we are on where we are in a cycle of mining or infrastructure. We have a well-proven business model, and that has been shown during, I would say, the last eight years. These have not been easy years in the world. There have been several different challenges, but we have proven that we are resilient in our performance, and the ambition is then to outperform and to create value for our stakeholders. So our mission is to drive and accelerate the productivity and sustainability transformation for our industry. And hopefully during today, you will see that it all starts with customers. It starts with their needs; their needs for productivity, for safety, or for more sustainable solutions. And that is how we build our strategy. That's how we create our product roadmaps and our solutions. And what do we mean by our industry? It is very much hard rock excavation. The harder the rock is, the more difficult it is to drill and to excavate. And that is where we are at our best. We have roughly 80% of our revenue from mining and 20% from infrastructure. And a big portion of our mining exposure is toward copper, gold, and iron. And when it comes to infrastructure, the biggest exposure is toward tunneling. So underground tunneling, but also major civil engineering. So let's start with deep diving into mining then. Last year, it represented 79% of our orders received. We estimate a long-term underlying market growth of 3 to 5% per annum. And now we are talking long term. I will not cover our offering. Hopefully you know our offering, but we have a very strong position when it comes to surface drilling applications. We have a strong position underground with a complete range of underground drills, loaders, trucks, and bolting equipment. We have a very strong set toward exploration. I will touch base on that a little bit later. But also, we have a very strong aftermarket offering towards mining, including spare parts, maintenance, rock drilling tools, rock reinforcement, and different types of technological solutions for automation, electrification, and digitalization. Furthermore, we provide solutions towards infrastructure customers, as well as products that we may have acquired from infrastructure sectors that can now be utilized in mining as well. Mining is a fascinating industry. It is a huge industry. There are more than 5,000 copper, gold and iron mines in the world, and this industry depends heavily on quite a few mission-critical machines. If you take a small mine, it can depend on between 20 to 50 pieces of equipment, and that is important because it tells the story of how mission-critical our business is. If you take the largest mine sites, they could have somewhere between 250 and 500 critical heavy mining machines in that system, developing that mine. So we are exposed to the niches and the products where it matters the most, where performance matters. When one of these machines is down, that is a significant production loss for that customer. And that means that uptime is crucial. The service of these machines is crucial. And this is why the aftermarket is so critical and why we are seeing such a strong position in a mission-critical environment. Our demand correlates very well with the commodity prices. And here you see the weighted index of our mineral exposure and our orders. And here you see we have an 83% positive correlation. And of course, short term right now the commodity prices are at very high levels, especially for copper and gold. In the short term, that gives an increased need for rock drilling tools and an increased need for service because customers are trying to keep the equipment running at high productivity. In the midterm. Of course, this gives an indication of more CapEx and long term. It also provides an incentive to do exploration drilling, as well as expansion projects like greenfield developments. And if we look into the fundamentals of the commodities where we have a high exposure. So 36% of our orders from mining comes toward copper, and copper is at historical levels. We are seeing very high prices right now. It is, of course, driven a lot by the electrification journey and sustainability journey of the world. And here we see strong activity levels both when it comes to expansion, but also when it comes to exploration. And copper is perhaps different compared to the other commodities that we serve. Since there is a clear long-term gap between demand and supply. So there is clearly not enough copper mines up and running to really close this gap. And this is also why we see spend going into expansion towards copper. Another exposure for us is gold, which is also at a very high level. It is 29% of our exposure on the orders received right now. And here, of course, the demand is mainly driven by jewelry consumption, but also investments and central bank purchases. We see a lot of the exploration ongoing right now is towards gold, but also expansion projects. And in Q1, we also noted that a lot of the large orders we landed during Q1 were for gold. Iron ore is perhaps not at peak levels. It is at more of a historical average level. We have today 14% of our orders towards iron, but we have a very strong position towards iron. A lot of the iron ore mines are big open pits where we have our surface equipment. And this is where we have a very strong position from a market share standpoint and also where we are right now. We see a replacement cycle happening in several of these mines. If we talk broadly about our customers, there are a number of challenges they face. We have surface deposits being depleted. Customers need to grow. They need to either go deeper in a surface mine or they need to go underground. It's also the case for underground mines. They also will have to go deeper. We estimate that mining operations go roughly 30 meters deeper every year. That is the average rate at which the depth of underground mines is increasing. And with depth comes complexity. It comes, first of all, with lower grades, but also more complex ore bodies. We also see that many of the mines that will come on board in the coming decade are in water-stressed or conflict areas, and it is becoming increasingly difficult to attract labor to these industries. And that is something where technology really can make a difference. So we focus on solving these challenges for our customers. And you can see on the lower side here, the utilization both in underground as well as surface is still quite low. That means a fantastic opportunity for us to work on productivity with our customers. Automation is one of the solutions that we have been working with for over a decade in rolling out different levels of automation, from teleremote up to fully autonomous mixed-fleet, including drills, loaders, and trucks. We have today more than 900 driverless machines, and it has been growing with a CAGR of 17% since 2013. So this part of the business is growing in a very healthy way. And where we are unique here is our mixed-fleet offering. Before we jump into the details on innovation, I would also like to show a movie on how to unlock the power. And this is from Antofagasta, Los Pelambres in Chile.
Sharing the vision that the basis of sustainable mining is to guarantee the safety of its workers. Epiroc Chile, together with Los Pelambres Mining Company, undertook a project to convert the Pit Viper series drilling rig fleet to fully autonomous. The deposit, where copper and molybdenum concentrate is produced, is 240km northeast of Santiago, the capital of Chile. It is located in the Andes Mountains of the Coquimbo region, near the border with Argentina, and almost 3,600m above sea level. The full autonomy of the Pit Viper 351 has allowed Los Pelambres to withdraw the operators from face-to-face shifts and decrease the presence of maintainers in the drilling areas, which reduces risk exposure times. The company also reduced evacuations due to blasting, offered new professional opportunities among workers, made the transitions of operators in the room smoother and strengthened some processes, such as the supply chain.
One of the changes, as the main benefit, is that we have effectively gained approximately three additional effective hours.
Benefits of autonomous operation. Greater safety. Remote operation outside the mine. Obvious improvement of utilization in remote drilling versus manual operation. Productivity. Increased operational drilling speed, higher hole depth, precision, increased hole location accuracy, reduced maintenance cost, and longer service life of drilling steels. Life of drilling steels. The application of Epiroc automated solutions at Los Pelambres shows the interest of both companies in leading the mining of the future.
So for us, it is both to get the most out of each and every machine so that each and every machine can perform the best. It is also to get a set of machines to work as efficiently as possible, as what you saw here in the film. But then, of course, to keep the machines up and running, and this is where each and every new development that we bring to the market increases productivity. The example you see here is one of our electrified machines that delivers 11% more tonnage. So it is not just a switch from diesel to BEV. It is also a productivity improvement. When it comes to maintenance. There is huge potential when it comes to both preventive and predictive maintenance. And we see that when we apply these methodologies, we can reduce the downtime by up to 50%. So this tells us how important it is to work on both areas, constantly driving more and more efficiency for each and every machine. The full system of the machines, and then also the uptime of each and every machine. And then I will move over to service, since it is such a critical part of our business. So it represents 41% of our orders. And we have been growing by 9% since 2015. So a good, good growth story. And here, presence is the key; we have today 7,800 service technicians. Many of them are working on the mine sites together with our customers. They are embedded in their operations. We have 1,200 customer sites with service agreements. We have 300 sites with service contracts where we have labor on site, and we also serve these customers in all these markets with workshops. We have more than 75 workshops across the globe, and we are constantly building out this network. And then ten global distribution centers for spares and consumables. And talking about service here, you will see the first discussion I had with Marna Cloete. She is heading Ivanhoe.
So with Kamoa-Kakula, Ivanhoe has been on a fantastic journey to create one of the world's largest premier mine sites and in a complex country like DRC. So, what role do you see that Epiroc has played in that journey?
You and your team at Epiroc have been extremely supportive. You know, from the onset, building a new mine, you have to choose the equipment you're going to go with. And without a doubt, we believe Epiroc has by far the best drilling equipment in the world. So we pursued a relationship with you, and we managed to secure much-needed financing in the early days at Kamoa-Kakula through Swedish government support. And that was really on the back of the quality of your equipment. It has been a fantastic partnership for us.
So. How do you view aftermarket capabilities like service and maintenance in the country?
Your team has been excellent in setting up local hubs and being able to supply us with critical spares. It is a complex environment. It is nice to have people on the other end of the phone, and people that can visit your site quite quickly to assist when you need help servicing machines and getting access to critical spares. That relationship with Epiroc has been very meaningful for Ivanhoe Mines in general, but also in South Africa and at Kipushi in the DRC.
Moving over to equipment. Then here you see our growth since 2015. We have been growing by 11% per annum on the equipment side. And you also see the split between replacement and brownfield expansion. And now also the greenfield. And if you look at this, of course, the majority of the growth we have seen has been replacement as well as brownfield expansion. But it is also good to see now that the green part of this bar also increases. So that represents new greenfield projects. We also have the exploration embedded in that definition. So that sits today at 16%, which is, as you can see, higher than it has been historically. And Greenfield. Greenfield. It is, of course, a cyclical market. It peaked in 2011 and 2012. If we look at total CapEx going into exploration, it is still not at its peak, even though it sits at, you know, 12 to 13 billion. But not at peak level, a big portion, roughly 50% of all the CapEx going into exploration goes towards gold, 37% towards copper. So this is roughly 90%. And also where we have a high exposure. And then regarding our offering for exploration, we have over the years, step by step, invested in this offering. We have been developing our offering organically, but we have also done a number of acquisitions within these segments because we believe in this segment long term. Today, our exploration business sits at 3.1 billion SEK. We have been growing with a 17% CAGR since 2023. I have mentioned in several of my quarterly calls that it has been the fastest growing segment for us, and we believe strongly in this. When we look at exploration, we have a complete offering for this segment. Now we have core drilling machines. We have reverse circulation machines. We have all the consumables that are needed for these methodologies. And we have digital components. So, a strong focus for us is to capture the activity level in exploration. Moving over to infrastructure, then. So infrastructure represents 21% of our orders. And here, we estimate a long-term market growth of between 4% and 6% per annum. Now, regarding our offering towards infrastructure. We have also a very solid offering here. We have a strong position both in underground and surface drill rigs, but also for underground loaders as well as trucks. We also have ventilation systems. Then we have a full suite of aftermarket products. We have digital products for tunneling; for example, we have, of course, spare parts, maintenance, rock drilling tools, and then a very good set now of specialty attachments. And it all aims at driving safety at construction sites, higher productivity within infrastructure, and lower emissions. And here you see our exposure split between the different types of infrastructure. It should be mentioned here that attachments are actually used in all these boxes. But the biggest part for us is tunnelling. It is underground tunneling. And then we have major civil engineering, but we see a growing trend towards deconstruction and recycling. And we have been working with indirect channels for many, many years towards this industry. So here you see me talking with the owner of one of our dealers in the US. It's Mike Paradis. He is the CEO of Bramco.
So, what do you think about the Epiroc offering in general?
I would say in general, Epiroc is probably best seen as a class-leading manufacturer of not just high-quality products, but solutions. When I talk to our customers about the Epiroc offering, they really see the value of the quality of what they are getting. The customers that really appreciate what Epiroc brings are those that value production, productivity, safety, and everything that Epiroc has been focused on for the past few years and decades.
And what about our offering? For the construction market? How do you see that?
I see that continuing to be a more important and growing aspect of our business with Epiroc. We have had a lot of customers across our footprint that have migrated to using Epiroc products. We provide both the tools and the attachments. We want to be partners with those customers that truly see the value of the product that they are getting from Epiroc, and we have seen quite a bit of success with that over the past few years.
And how would you describe Epiroc's strength compared to some of the other OEMs?
It is not just about providing a solution or a product, but Epiroc, and I think part of it is because of the hybrid model you have here in the US, really understands the value of having the right parts available, having the right service technicians available, having trained people, and having a really good response time. That is a huge value that we see, and frankly, we do not see it from a lot of your competitors. And also, I would say the safety focus and the whole overall safety culture of Epiroc is much stronger than what. I tend to hear and see from other competitors and other manufacturers. So I think all together that suite that you bring just makes you a great option for our construction customers.
And if we look at the last two years, of course, the infrastructure segment has been slow for us. But when we look at this long term, we see a lot of initiatives going into rebuilding. If we look at what is happening in the US, for example, and the plans there when it comes to infrastructure. Also when it comes to Europe, especially Germany, with the rebuilding of the German infrastructure, including bridges, railways, and roads. This is where we are very well positioned now for that uptake. But also, we see that the more spend that goes into defense, that also drives the need for some of our products. And of course, there is a clear trend toward more deconstruction and recycling, moving over to engineering and product development. So we invest roughly 3% in product development. And that has been the level we have been at for some years now. We have roughly 2,000 engineers across the globe in many different parts of the world. But we are also leveraging the strengths of both our customers' R&D and technology teams, as well as our suppliers' development projects. We also perform acquisitions to gain speed when it comes to innovation. It is all about digitalization, automation, and electrification, and having the best machines and the best solutions, and you will have the chance to see them tomorrow in real life. But some words on digitalization. So when it comes to digitalization in mining, it is all about connecting people, machines, and assets and making them work in a transparent way for faster decision-making. And by doing that, you can unlock a lot of productivity potential. In this case, 8% higher output, 50% shorter evacuation time if you have a fire incident underground, etc. Digitalization for us brings us closer to our customers. It gives us higher service penetration and recurring revenue streams. And when we look at our position, where are we today? As I mentioned, we have 3,900 driverless machines out running. We have more than 100 systems of the highest level of Collision Avoidance System installed in the world, and more than 3,000 installed systems now on the lower levels of collision avoidance. We have a scalable digital platform. We have completed a number of acquisitions that we have now brought together into one digital platform that we can scale. I will show a movie now from Hindustan Zinc, from a discussion I had with Arun Misra, who is the CEO of Hindustan Zinc, India's largest mining company and one of the world's largest zinc producers. They have chosen Epiroc to equip their full fleet from all different types of OEMs with our Collision Avoidance System. So please play the movie.
So last year, you and I signed a partnership on collision avoidance solutions for your mines. So, how is it going? And can you please tell us a little bit about your ambition when it comes to safety and what role collision avoidance can play?
We have been pursuing a zero-fatality goal for a long time. However, off and on we had fatalities in the mine, and especially when 900 odd pieces of equipment operate in the mine with about 10,000 people working in various underground mines. We were looking for the right solution, and Epiroc came to our help, having been our trusted partner for a long time. And we signed the agreement last year that we would go for a collision avoidance system. Already, more than 100 people have been given the tags and equipment has been fitted. We are extremely happy with the results. The primary reports are all extremely positive. Operators are happy they are able to locate people anywhere in the near vicinity, and we have just decided to roll it out across all equipment, which may see a spike in expenditure, but it's a very small price to pay for saving the lives of our people and for the technology itself. What Epiroc has provided, I believe it is state of the art, and my people are extremely happy with the quality and also the accuracy with which the entire system works.
Epiroc has a large production capacity in India, and we are currently expanding our factories there and also building more R&D capabilities in Nashik. So what does it mean for Hindustan Zinc that Epiroc has these local production capabilities and local R&D resources?
So far, Epiroc manufacturing in India is a great boon to us, not only from a cost point of view, because of course there is an import duty, a very high import duty on mining equipment that we import, but also the fact that India is expanding in a big way in critical mineral mining. And most of these critical minerals are deep-seated minerals. So, that means they have to be mined in an underground fashion only. And the next 15 to 20 years will see a spurt and huge boom in mining in India, requiring hundreds and hundreds of machines. I am sure this opportunity will be grabbed wholeheartedly by Epiroc. We have about ten new mines, and in the next five years, they will all be opening up one by one. And so that might require maybe another 2,000 to 3,000 machines in play. So it's a huge opportunity.
Okay. Moving over to automation. Then I spoke briefly about automation earlier in my presentation as well. So the automation journey we started a decade ago, and we have come far on this journey together with customers across the globe. When we look at it for customers, of course, it is driven by safety, but also clearly by productivity. It also lowers TCO if you include the consumption of diesel, including drill steel, etc. And for us, this brings us closer to our customers. We get even more embedded into our customers' operations. It also increases the stickiness with customers, and it gives us higher service penetration. Jess will talk about that later on today. When it comes to automation, we have a unique position because we have OEM-agnostic solutions, meaning that we can automate our own equipment, but also other OEMs' equipment. We can today automate more than 150 different machine types from our peers or competitors. So that gives us the strength to take on an automation project together with a customer, no matter what fleet they have. And as I said, this is growing rapidly. We see today more than 3,900 driverless machines, and here our service presence is also crucial because with these more advanced systems, service and local presence is key to safeguard the uptime not only of the machines, but also the uptime of the system itself for the customer. We started this journey with a partner. It was almost ten years ago that we started with BHP in Australia. And here you have a conversation between myself and Sebastian Greco. He is the VP Procurement at BHP.
So I would like to start by talking about automation. So, BHP, you know you are in the absolute forefront of automation. And we began the journey together around automation of drill rigs almost ten years ago. So, can you describe your automation journey a bit and what role Epiroc has played in it?
Epiroc has been a key partner from the outset. Together, we moved from early stage experimentation of these technologies to co-developing capabilities like object detection through close collaboration with the factory and with our business planning teams and operations to mature, large-scale autonomous drilling operations. The success is obviously underpinned by the strong partnership. I think that we have built together common principles and a common focus on operational performance and particularly on safety. Helena.
Can you describe the type of benefits that you see in your operation related to productivity and safety?
Safety is the primary driver, with automation reducing the exposure of our people to high-risk activities and removing them from hazardous environments while creating more controlled operations; at the same time, it obviously enhances productivity and lowers our total cost of ownership, making it a core pillar for BHP's long-term strategy. And looking ahead, we see this as a high-value strategic partnership with a strong foundation and clear opportunities to dive further as we enter into the next phase or the next generation of automation and operational optimization in our sites.
So we have proven autonomy at scale in mining, both on surface as well as underground, and mixed-fleet automation in both underground and surface environments. And now we're expanding this beyond mining also into quarries and aggregates. So, as mentioned here in the movie, we have been working with BHP for roughly ten years to build up the position we have with them. On automation, we have been working with Newmont Cadia since 2017 on that solution. We have talked about Roy Hill, where we have implemented mixed-fleet automation for their surface trucks, and now we are expanding together into quarries. Taking our LinkQ platform together with Heidelberg Materials. We just signed that, and we will now roll that solution out also towards quarries and aggregates. So that's exciting. Moving over to some words on electrification. If we look at the benefits for customers, it's clear it is both higher productivity. It is lower emissions. It's lower temperatures. You can reduce the maintenance costs, you can reduce the need for ventilation, etc. And the benefits for us are, of course, to stay in the leading position in the niches we are in, but also that we strengthen the partnership with customers. More advanced machines require more advanced service. And this is where our technicians make a difference. And we get higher value out of each and every machine if we look at this in a consolidated way. And of course, it also provides recurring revenue streams across the full equipment lifetime. As you can see with the numbers here, it is not all about reducing CO2. And I think this is important. It's all about driving productivity, lower TCO, and, of course, lower energy costs. We have a very strong offering towards these industries. When it comes to electrification. We have the electrical infrastructure capabilities. We can provide retrofits. And we have roughly 43% of our assortment ready in some type of fossil-free version, but it is yet only 3.8% of our revenues, meaning that this potential is still ahead of us. We have today 40 sites with BEVs up and running. 40% of these customers have placed recurring orders with us. And this technology is proven. So we are busy helping our customers to scale this in the coming years. But we are convinced that fossil-free versions, be it cable electric machines, hybrid machines, etc. will be the solution for this industry. We have a couple of very interesting projects ongoing right now, but one that is ongoing here in Sweden, where we have proven really good outcomes when it comes to performance, is together with Boliden and ABB, where we have a battery truck with a trolley system and this is a large truck. And that is why we have a trolley system, because the ramp is long; this is a five-kilometer ramp. And as you can see on the productivity numbers here, this is a massive improvement with 50% higher ramp speed. That means 23% higher productivity and 126 tons more transported per shift. If you turn this into money, this is massive for a mine. So there will be different solutions supporting the electrical journey here. And we also see at the same time lower maintenance costs for the customers. And this is the leading case. So 25% lower maintenance cost for them. So if we talk about the market in general and we zoom out, the markets where we are in both mining as well as infrastructure are served by a few number of high-end players. There are high barriers to entry. It is not easy to enter these markets. These are not easy applications, and the buying criteria for our customers are high. And that is general. The buying criteria is not price. It is total cost of ownership. So the cost for the equipment through its lifetime, and this is where we make the true difference. And this is also what creates this stickiness to our customers. And of course, this is something that we build on. A lot of the strategy that I have presented, as well as what Jess Kindler will present, is aimed at creating that stickiness and protecting our very strong position with these customers. I will say some words on some key markets for us; China is, of course, a very important market for us. We see China as a home market. We have been in the country for many, many decades. We have a strong presence. We have full capabilities in China with product development and several manufacturing sites as well. So we are leveraging the agility and the performance of the Chinese supply chains fully. We have also over the last three or four years developed a multi-brand strategy in China. It is called GIA, where we are capturing the market. So we have a tiered offering in China where we are also capturing the more value-driven segment with completely separate R&D and separate sales channels. We are following the Chinese customers when they go abroad. And we conduct that business from China. So we have customer presence. We have customer centers. Representatives from China are placed in different parts of the world as key account managers in Zambia, the DRC, and elsewhere. And so, for us, China is an extremely important market, and the Chinese customer is extremely important. Today we have 900 employees. It represents 4% of our revenue. And we are step-by-step investing and building more and more capabilities in China. And here you will hear some words from Lin Pusheng. He is the CEO of Dazhong Mining, which is a long-term partner for us in China.
Epiroc has been active in China for several decades now, and today we employ around 1,000 people at several sites in China. We have several manufacturing sites in the country as well as an innovation center. So we consider China a home market for us. So, how important is it for you to collaborate with a long-term industrial partner with deep local roots in China?
Do you want? To go to you. For Toon. In Changzhou. Zhangjiakou. Xiao. Changzhou. Changzhou.
So do you have a.
What is your favorite memory of working with Epiroc?
And by. The. Way. In.
Moving over to India then. India is also a key market for us and we see this as a home market. We have had a strong presence in India for decades. It represents 3% of our revenues. But as you could hear from Arun Misra as well, there are plans to expand the mining industry in India. And of course, it is a rapidly growing infrastructure country as well. Our focus in India is to leverage the capabilities of producing strong supply chains, as well as the engineering capabilities in India. We have 2,000 employees in India today. We have a large engineering center in Bangalore. We have factories and we are expanding these factories. We did it last year and we are taking another step this year to build even more capacity in India to be able to both supply our industry needs in India from infrastructure as well as mining, but also to use India as a global hub to produce for Asia. But there is a lot of potential in the world. There are a lot of projects ongoing. There is a high activity level in Chile, Peru, and Argentina. These are more mature markets for us, but as we have said, we are investing early in workshops in these countries to make sure that we will be there when the projects kick off. There are also a lot of projects and expansion plans in both DRC and Zambia. We have a strong presence there as well, but this is also where we are investing in more capacity, more workshops, and in Saudi Arabia as well. To mention, we have a presence in Saudi Arabia already, but there are impressive plans to become a mining nation as well. And then we are early on investing in these countries to capture the growth opportunities for the future. And one, this is new. We have not presented this before, but we have over many years been using a multi-brand approach. So of course, Epiroc is our main brand and our premium brand. But we have also, over the last 6 or 7 years, built up a comprehensive offering for multi-brand. And this is to be able to capture a broader share of the customers and to be able to play with different value propositions depending on the end customer. So here you see GIA as an example, this Chinese multi-brand, but also other brands that we are working with in parallel. So I will close my presentation with a statement. For decades, innovation and global presence have been at the heart of Epiroc. And it is the same combination that will continue to drive our growth and define our future. So thank you. And we will watch a video on this.
Innovation defines our leadership presence where performance matters. It all began in Stockholm, 1873. A small engineering company that clearly didn't plan to stay small. One country at a time. We followed the rock, and soon the rock started following us. In 1936, the Swedish method changed everything. Proof that sometimes the best export from Sweden isn't just music. From mines to mega projects like Mont Blanc. When others saw mountains, we saw opportunities with a deadline. We continuously launched new innovative equipment like the Boomer, setting new standards for underground mining productivity. In the 1970s, we went where roads didn't exist and neither did excuses. 4,600 meters up in Bolivia in the 90s. ERT and hydropower plant in China. Big project, big ambition, still running today. In 2004, we acquired a company in Texas that made Epiroc the global, undisputable market leader in drilling with the Pit Viper. In 2011, we opened an R&D center in Nanjing, China. Because innovation travels better when it's local. On June 18th, 2018, Epiroc was listed on Nasdaq Stockholm. In 2022, Epiroc exited Russia, leaving our fourth-largest market, 7% of the order intake, and 500 employees behind. But let's stay positive. In 2023, we won our largest ever equipment order, 700 million Swedish kronor, for the expansion of the Kamoa-Kakula copper mining complex in the DRC. In 2020, at Roy Hill in Australia, we started proving that modern mining can be autonomous, connected and a little bit smarter than yesterday. Then we raised the bar again. We reached 2.2 billion Swedish kronor with Fortescue's electric autonomous solutions, a milestone that will be very hard to beat in 2025. We decided to expand our manufacturing footprint in India further with a new rock drilling tools facility in Hyderabad. Closer to customers means closer to growth. Innovation defines our leadership presence where performance matters, and together we are just getting started. United in performance. Inspired by innovation.
So thank you, Helena. It's time for our next presenters. But I have received some questions about the Wi-Fi. So Wi-Fi and the password is Conventum with small letters. So the next presenter is Håkan Folin, my manager. He is truly demonstrating that this decentralization and accountability work in this company. Thank you for your trust. You have been five years in this company, and you have adapted well to our culture. So it is a pleasure to have you presenting next. Thank you.
Thank you very much. And thank you, everyone, for joining us here in Örebro today. I will start by talking about outperformance, and what outperformance means for us. It is really the result of the actions that we are taking. Since Q1 2018, we have grown our orders by 83%. We have grown revenues and EBIT by around 90%. We have grown the operating cash flow by 80%. And then, last but not least, we have grown our EPS, or earnings per share, by close to 100%. And this outperformance is really driven by a well-proven business model, where we combine a high share of direct sales, around 80%. With a strong aftermarket, we have 66% of our revenues coming from the aftermarket and also with an asset-light manufacturing setup. And this gives us flexibility, resilience, and strong margins. And importantly, this model is based on decentralization and innovation. It has been refined for decades. First, when we were part of Atlas Copco, but now for the last eight years. Then as the Epiroc group. So before I dive into the numbers, I want to provide you an overview of how we report. So we have two business areas. We have three revenue streams and we have eight divisions. And a key strength is our revenue mix, where 66% comes from aftermarket. And this is a combination of service, including digital, which is around 40%. And then also the tools and attachments business, and this high portion of aftermarket revenues creates good visibility for us, strong margins, and also lower cyclicality. So I will go through our financial goals and start with our goal on revenue. And here, our target is that we should grow by 8% per year. As you can see here, and this is from 2015, which is when we first had official Epiroc numbers. We have actually grown by this 8% on average. Revenue growth, however, is not a straight line. And it will never be. And we will not chase growth at any cost. Every year, we want to protect the ability to grow over many years. And in this graph, you can see two times where we've had a revenue decline; first, in 2020, when we were hit by Covid, we stayed focused on serving our customers all around the world, and I would say that was rewarded in later years, which you can see through our service growth. The second decline came from two factors. One is the. A decline in construction demand and the stronger Swedish krona impacted our reported revenues, which you see in 2024 and 2025. So, I mentioned that the construction market weakened. And how much did it really weaken? You can see here that from the peak in 2022, up until Q1 2026, rolling 12-month orders from infrastructure were down 22%. The attachment business was especially impacted by this, and we have responded with cost actions, efficiency improvements, and improved flexibility in our operations. And you can see the result of this. Now on the bottom line for the attachment business. Another positive thing is that the destocking phase that started taking place from the second half of 2023. Our view is that that was basically finalized in Q4 2025, which means that we now have a fairly positive outlook for demand for attachments. On the margin side, our financial goal is to deliver industry-leading operating margins with strong resilience across the cycle. And on this graph, you see exactly that. It is a business with limited margin fluctuations. We have low, so-called one-offs. And that gives you a very transparent earning profile. And I would say that over time, we have built a model that delivers high profitability. The recent margin decline, you can see, is basically due to three factors. One is acquisitions, and that is roughly half of it. Then, it is the weaker construction market that I was just talking about. And then thirdly, it is also a change in revenue mix where we have a lower share of tools and attachments and service, but actually also a mix within service, where we have had stronger growth in some areas where we have a bit lower margin. And so if we look into the details then and to your right, then you can see the Tools & Attachments. And here demand decreased first, and so did also the margins, as you can see. So we started taking actions here earlier. And you can also see that at the bottom of this slide is the flow-through, and from Q1 2024, we have started seeing positive organic flow-through in our Tools & Attachments business for Equipment & Service. The margin decline came later, mainly explained by acquisitions, as I mentioned before, and also the mix. We have taken actions here as well, improving our service efficiency and working on our production footprint optimization. And in Q1 2026, we were back at positive organic flow-through in our equipment and service business. So we're not standing still. We are working with small, pinpointed measures without too many complex saving programs. After all, we are still in a growth mode, and we want to make sure that the savings we implement actually protect profitable growth over time. And over time, I will speak about long term now as well, because cycles don't disappear. They repeat. Our job is not to protect them, but it's really to make sure that we are ready when they come. And what you see on the chart here is Atlas Copco Construction, Mining Technique and Mining and Rock Excavation Technique. It's not the perfect measure of Epiroc as of today, but I think it's good enough to show the long-term determination of this company. So what you can see is that margins have shown a clear upward trend over decades, despite cycles and despite volatility. And the key message is that we recover quickly after downturns and we reach higher levels over time. But we don't want to have growth at any cost. We don't want to have margin at any cost either. So, for example, we won't cut R&D in the short term just to improve the margins. We want to have a balanced delivery on margins, returns, and cash. So for us, performance is not about the peaks. Performance is really about continuous improvements over time. Another goal is on the capital efficiency side. We deliver a strong return on capital employed while we continue to invest in growth. The decline in return on capital employed, as you can see here, is mainly because of increased cash and also acquisitions, because the acquisitions made will generate intangibles on our balance sheet. In terms of acquisitions, we have made more than 30 since the creation of Epiroc in 2018, and they have in total contributed around 14 billion in revenues. What has been very strong over time is the growth in equipment orders. It has been 11% per year since 2015, and our equipment is made to order. So as growth accelerates, working capital will also increase. Also, the regions where we have seen the most growth over the last few years are in far-away markets and remote areas, and that has led to somewhat higher lead times and inventory levels. And that is not only for equipment, but it goes just as much for our spare parts and for our tools. Focus is not on minimizing working capital, but focus is rather on making sure we have the right working capital for the current operating conditions. So, producing to order has its advantages. We produce only the core components where we want to safeguard our own innovation, and we want to have a flexible manufacturing setup. And actually, as much as 70% of the product cost for equipment is purchased from our suppliers, and it enables us to be fast both when demand goes up, but also to adjust costs when demand goes down. It also results in quite low CapEx needs. We have said our capital expenditure need is between 2% to 3%. Actually, if you look at the last few years, it has been lower than that. But as you heard Helena talk about before, we are looking to expand more in growth markets. Now, in the coming few years. Now we're going to spend a little bit of time on service. Service is a key driver for us both when it comes to profitability and also cash generation. As you can see, service orders have been around plus 9% per year over time, really demonstrating structural growth and resilience across cycles. We have actually achieved consistent organic service growth over time. The majority of the years have been above our target level, but actually all of the years have been positive. From a financial perspective, this is very attractive because service delivers high margins, strong recurring revenues, and robust cash conversion. So service is not only growing, but it's really increasing the quality, the resilience, and the cash profile of the Epiroc Group. And more details on the cash. Then we have high and strong cash generation. Despite the strong equipment growth that I just told you about, and actually since 2015, we have had a cash conversion rate of over 100%. Recently, we are around 88%. We have a mindset that every krona in the result counts, and as much as possible of that should be converted into cash. So the next financial goal is to have an efficient capital structure and the flexibility to make selective acquisitions with a goal to maintain an investment grade rating. And we do that. Our rating is triple B+ with a stable outlook from Standard & Poor's. And I would say that this rating level is fairly comfortable for us. We have the possibility to make acquisitions without being too tied up by financial metrics over time. Our net debt to EBITDA level has been at 0.35, which I would say is a very low level. We are now at 0.7. And even though it is clearly higher than where we have been, we are still at a comfortable level and we have flexibility to invest both organically and through acquisitions. And we continue to add capability through M&A. When we look at M&A, we have three criteria. First of all, standalone attractiveness. So, is this target attractive and well-performing in itself? Second, we look at strategic fit and synergies with Epiroc. Does it support the core business strategy of Epiroc? And thirdly, does it have the potential to become or remain number one. Does it provide a path to an indisputable market leader? Our target areas right now are looking into complementary core. We look into the aftermarket business and we look into the digital business. Since becoming Epiroc, we have acquired more than 30 companies, bringing in a broad set of technologies and capabilities. And like every business we do, we have three stages, which you see here on the slide. First is stability. This is really about ensuring predictable operations, strong processes, high quality, and reliable delivery. And if I simplify it, no surprises when it comes to deliveries and financials. The second stage is what we call profitability. So once the business is stable, focus shifts to improving performance within its current form using operational excellence to give better profitability. And then thirdly, we are in the growth stage. But this is only when we have the two first stages in place. Growth can then come both organically or through acquisition. It can be about expanding capacity, footprint, or offering, but it is always on a controlled and profitable level. And the key principle with this is that you need to earn the right to grow by first having your stability in place and then having your profitability in place. And if we look at the acquired companies, they are in all three of these boxes. We still have a number of acquired companies in the stability portion. They are small, and mainly they are part of the digital portfolio, but a low portion of the acquired revenues. Then we have some in the profitability and we also have some in the growth post. Not as many, but with a higher amount of revenue. One such example is ASI, the mixed-fleet automation solutions company. So overall looking at this, I would say it's a quite well-balanced portfolio where we see a lot of potential value creation ahead of us. Okay. Next financial goal then is to provide a long-term, stable, and rising dividend to our shareholders. And the dividend should correspond to 50% of net profit over the cycle. And we have basically three priorities when it comes to how we use our cash. The first one is we want to invest in our organic growth. The second is we want to invest in acquisitions. And the third one is to give returns to the shareholders, according to the target I just mentioned. And you see in the graph the dividend we've been paying out and also what payout ratio we have. We have maintained this over the years. And the average of this is 51%. I would say we are fully in line with our financial target when it comes to dividends. Since the creation of Epiroc, for 2025, we will pay out a dividend, or we are paying out a dividend, of 3.8 Swedish kronor per share, or in total, 4.6 billion. So to conclude, we aim to generate an annual growth of 8% per year. And if you do the math from where we are right now, 8% per year would give us 100 billion in revenue by 2031. And it is of course hard to predict where the industry-leading margin will be in 2031. But you can be certain that we will make our utmost to ensure that we are the one with the best industry-leading margin. So, some final words. We don't promise perfection quarter by quarter. We promise discipline, transparency and cash generation through the business cycle. So thank you very much from me.
Thank you. Well done. So I know the energy in the room is high because everyone is awake and eagerly writing on their laptops. But perhaps those online deserve a break. So we will take a 20-minute break. And here in Örebro, Sweden, we will serve coffee and some sweets outside and we will see each other again at 4:10 local time. Thank you.
Okay, welcome back. I hope you enjoyed some fika. And now it's time to discuss and deep dive into the business areas. And as you know, we have two business areas. We have Equipment & Service and Tools & Attachments. We implemented this business area organizational setup on the 1st of September last year. And this is to be even more focused on leveraging the full scale of our total offering for both business areas. And with me today we have both Jess Kindler and José Manuel Sanchez. I'm super happy to have them on the team, and they will now present the different business areas and the strategies moving forward. So, first out is Jess Kindler. Jess has many years of experience in the group as well. Welcome up, Jess. We have been working together for almost 20 years now. So we know each other extremely well. But he has also been in many different roles in the company, as you can see on this slide. He has also lived abroad and traveled extensively. We have met during the last six months in many different parts of the world already. So the stage is yours. So go ahead.
Okay. In with a bang. Equipment & Service. I would like to cover a little bit of the historical performance. I know Håkan and Helena already covered quite a bit of it, but I will walk you through just from the Equipment & Service business area itself. So after a few strong years, after we launched Epiroc, it was really driven by the services business and the help from the US dollar. We peaked at margin in Q2 2022, and now it has come down a bit. Håkan mentioned a lot of it is due to acquisitions. We were quite acquisitive even back then as we started Epiroc. It is always tough to find the same level of performance in acquisitions when we bring them on. So we see that almost every time. But the last few years we've done a lot of activities like Helena Hedblom mentioned, such as optimizing manufacturing operations, looking at where we can do rooftop consolidation, and ensuring we remain the agile company that we normally are. Some other good things, though, that we have done in the last couple of years are dynamic pricing and service. We have continued the service agreement journey that started with the service division almost ten years ago, and then integrated more automation. And with this increased automation, you see a higher attachment rate. Of course, the more complicated the agreements become, the more sticky we become with the customer. So we like developing that business a lot. And in Q1 2026, we reported a margin of 24%. Even despite lower revenues. So it's an achievement and it's definitely a proof of the actions that we took the last few months. Okay. So I am going to start off with the equipment. So our strength really is the breadth of offering. Like Helena Hedblom mentioned, we have one of the most diverse and complete portfolios. When you look at our surface and underground equipment portfolio. And then we, of course, have stayed in exploration and invested in it and grown that as another leg for the surface and underground. Most importantly, this is supported by the aftermarket and the service division, including the consumable side that José is going to talk to you about, plus the service side and the technology, adding another leg to our business. And then we will go through some achievements since the last Capital Markets Day. So we clearly strengthened our leadership in autonomous drilling. We were sort of the first ones there. And then we were the first ones to get the most complete offering out there, the most robotic machine that is available. And today it's deployed globally. Helena is right. We've seen each other in some really faraway places, and in many of those, they go for automation, even if labor is quite cheap, they choose that automated solution just because the productivity is so high. And maybe it's tough to get people out to those remote job sites. We have secured our largest electric drilling order. So that was the Fortescue order that Håkan highlighted. 2.2 billion SEK. So a great achievement down there, really showing that that electrification drive is real. It is driven by economics, and it is definitely accepted in a mining market like Australia. And again, this is not just about machines in the equipment division, but it is really about getting all the machines to talk to each other on the same system. So again, we started that OEM-agnostic journey almost 15 years ago. And now, all of our own machines talk the same language, plus all these machines on that third-party system through our LinkMine platform. And I think it is really powerful, because I do not think we go to too many mine sites where there is just one brand of drill out there. There are multiple brands out there. And it's important that if you're offering automation or you're offering electrification, you make it work on all those solutions on the mine site. Okay, this is my favorite slide, so I might get too excited. Drilling is my favorite. I mean, the whole reason why Epiroc is in drilling is that nothing else on that entire mine site moves until you have broken rock. To break the rock, you have to drill a hole, and then you have to put explosives in it and set it off, right. So if something happens with the drills, it is quite a significant operational event on the mine site. And you do everything you can to get that drill back up and running. So you have broken rock to feed the loading and excavating crew to feed the processing plant. So that's why we're in it. But the better you can do it, you also have a lot of downstream effects to improve the production of that mine site. So if you have quality drilling, you get good fragmentation. It is easier to load. There is no secondary blasting. It goes through the plant easier. It is a more consistent feed. And so you just drive that whole value creation cycle at the mine. And for Epiroc, it really puts us right there at the beginning. And so I would like to talk a lot about life of mine. And when our people are there, we want our people there from the exploration stage all the way through closure, and drilling allows us to do that, from exploration all the way through production and then finally to the end of the mine site's life. And we live with the customer out there. Okay, so let's continue on load and haul, which is another critical part of the value chain. It's what comes after drilling. So since the last Capital Markets Day, we have increased our capabilities in that mixed-fleet automation. Helena mentioned the mine rescue at the Red Chris Mine in Canada earlier last year, where we automated one of our competitors' pieces of equipment to rescue some people. But another example that Helena covered was Roy Hill, where we have the largest automated mixed fleet of surface haul trucks in the world, and also in electrified load and haul. We have also made some great achievements, and tomorrow you will actually get to see, touch, feel, and hear one of these achievements, and I will cover it here in a second. But we've made good progress on that. And a lot of the examples that we have are creating real value. And that is important because, again, people do not buy automation just for technology's sake. They buy automation because of the economic benefits to that mine. Those benefits include running through the shift change, where the operators leave and switch out with the next set of operators. The machines keep running or, to the extreme, where you are operating a fleet, let's say up in the Pilbara in Australia, and your operators are 3,000 miles away, and one operator is really running nine machines. Again, that is a huge economic benefit. And that is where we are at. Okay, so now I am going to show you this one tomorrow. As I said, you get to smell, hear, and watch it in operation. But this is really exciting for us because we took one of our, let's say, segment-dominating products and made it even better. So here we go. Oh, sorry.
It's excellent.
It's really good to see it on the ground. Moving dirt.
Revolutionary. Top of the range. First in the world.
A solution that helps us bridge the gap between conventional diesel and battery electric.
Today we're showcasing the MT66 S-Drive. The MT66 S-Drive has the John Deere JD18 engine. We then have two generators in place of a transmission. Those generators then power four electric wheel motors on the machine to propel it up and down the decline.
The torque put on the axle is just amazing and the speed up the gradient. It's evident if you look at the unit that it features a diesel motor, but it's much smaller so you have fewer emissions driving a genset. And for electric wheel motors.
It was quite an unfair competition on all fronts, just with the increased acceleration at the beginning. And then just the way the MT66 pulled away from the conventional truck up the hill.
We have had several operators hop into the truck and drive it around the test track today. This gives them the ability to test out some of the new features and the capability of the mine truck.
To be able to interact with all of the maintenance and support staff, and just being able to see the truck in operation and get the opportunity to drive it.
Great seeing everybody. We like to believe they are not customers. They are partners. Partners in innovation. A lot of them had a hand in the design of this unit. We listened, and we've delivered.
Okay, I realize I don't have to push the button to start the movie now, but anyway, I am really excited about the new truck. And of course, I love the numbers even better. So again, people don't buy products because they are new. They buy products because they add more value. And this mine truck 66 E-drive transports 20% more tons per hour while simultaneously reducing fuel consumption by 25%. And it has a 15% shorter cycle time. So again, that is transformational when it comes to a fleet of these moving material in the mining industry; the faster you can move the material to the plant, get it processed, and refined, that is where the value is created and captured. Okay, moving on to loaders. So, electric loaders. Again, we are continuing to strengthen our position. We have an electrified Scooptram 14-tonner called the ST14 G. And it already stands out as the best in class in both operating time and safety. And with the design enhancements coming shortly, we expect to extend that again another 15% in 2027. At the same time, we're reducing the charging time from 85 minutes today to approximately 35 minutes using the megawatt charging system or MCS technology. And this combination of higher productivity and faster charging simplifies the integration of battery electric equipment onto the mine site. And that gets the customer's acceptance even faster. So looking ahead, we are going to continue to improve both range, speed, and charging time going forward. So that is how you develop these BEVs over time. Okay. And then looking at electrification again, one of the biggest benefits of electrification, if you remember the very first movie, this deep automation movie, as you get deeper into the earth, as you go down, the temperature goes up. And so you need more and more ventilation. The deeper and the longer your tunnels are underground. Ventilation is responsible for about 40% of the opex cost on a mine site. The OPEX cost on a mine site. And ventilation, of course, is consuming a lot of electricity. So when you put electric machines underground, they don't have that same requirement for ventilation because you are no longer diluting emissions from diesel engines. And that is the more diesels you have underground, the more air you need flowing down there. So when you have electric machines down there, you do not need nearly as much ventilation, and you are not generating as much heat from the equipment as well. So then electrification becomes more of a business decision versus just an ESG or sustainability decision. The other thing you saw Wayne Stirling talk about in the movie, and I got to drive one of these machines up in Canada when we were looking at the very first generations. It is truly amazing. I mean, there is no noise at all. The machine is quite powerful. And you just get in, mash the throttle; it's not gas anymore. And you just go and it digs into the pile with a lot more power. So this will be driven by economic decisions going forward. And then, let's talk about safety. Helena mentioned that we always start with safety. And safety with batteries, of course, is very important. And we design ours with all these different backup safety systems. And from mechanical protection to the advanced energy management and cell design that we have. We have done very well to have zero injury-causing accidents in the years that we have had these electrified pieces of equipment. So because operations underground are inherently high risk, it's very important that we're not adding to that risk by putting a new solution down there. So it was very important to us then to make sure we have all these different redundant safety systems on the machines. Okay. And then let's talk about service. Another one of my favorite subjects after drilling. So service has been a core driver of Epiroc since the spin. And we see consistent long-term growth and strong underlying demand. And so, since 2015, we've achieved that 9% order growth rate. And that is mainly organic. And this is driven by utilizing the fleet more. It is also driven in combination with the age of the fleet and the initiatives that we implemented to protect our service productivity and package our services in a way that is easy to sell at the customer center. So whether it's a service agreement type or whether it's some new solution that we have to extend longevity or improve performance, all these different initiatives have added to that ability to grow in service. And most importantly, service is highly profitable and cash generative to Epiroc. So the more that we can invest in service, the more workshops, the more technicians, and the more presence that we have, like Helena mentioned, leaving Russia and then being able to go to Congo and Zambia to grow those businesses to make up for it was big for us. And I think we've learned those lessons over the years. Okay. And then again. Did I switch? There we go. Okay, so the service offering is broad and robust. We talk about parts and kits. We talk about agreements and audits. We talk about the circular solutions. And when I say circular solutions, again, this is something that helps both the planet and the customer. So the customer saves money because they do not have to buy a new component. And we are helping to recycle or remanufacture that component and put it back into service. So whether it's a major component, like an engine or transmission or hydraulic pump or motor, or if it's the entire machine, we are prolonging the life of that mineral content and energy that has already been spent. And then, the last area is around training, support, and digital. So we see this digital enablement more and more. We are going to give you an example here shortly on that. But digital enablement really allows us to get technicians up to effectiveness faster. And so before, when I started 25 years ago, it was a lot of books. You had these big binders and you had to dig through these books as you were troubleshooting or fixing a machine. Now, all of that information is compressed into one device, and it is just at the technician's fingertips. Okay, I like this slide as well. It really showcases all those different offerings. When do they occur? When the machine goes to the site. So you have this initial new machine, and then you have a warranty period where you are not going to see tons of revenue, but you set the stage when you sell the machine and you agree with the customer on a maintenance strategy and how the equipment is going to be maintained on the site, and you set the stage to sell all these products over that. Again, that is the life of the fleet, and then hopefully multiple fleets over the life of the mine. And so that is how we do it and how we make sure that we do well on that first fleet. So we get that next fleet and the next fleet after that. So that service always secures the follow-on sales from the initial fleet sale. Okay. Downtime is driven by the harsh conditions that we are operating in. If you think about a drill, another reason why I like drills and I like hard rock is that the machine is basically shaking itself to death. So as you are out there, it sounds graphic, but that is why we like these machines, because they are out there putting maximum energy into the rock to break it faster than anybody else. But in the process, it is seeing dust, it is seeing heat, and it is seeing vibration. That is why it is going to hit that breaking point. What we can do now that we could not do ten to 15 years ago is analyze the machine and be much more prescriptive and predictive regarding when those components are going to fail. And that way, we are not experiencing this kind of random downtime, but we can really plan it out with our customer. I mentioned earlier, we agree on what is called a maintenance philosophy, and that philosophy could be that we run the machine to failure and then we fix it. But it could also be that we run it under a planned time cycle, and we replace the components before they fail. And then, if we get very advanced, we are monitoring the machine, whether it is through oil sampling or temperature control. And then we can make suggestions to the customer regarding when they should change out those components or when they should take the machine down for maintenance. So this is what our fleet profile looks like. So the fleet is a prime time for services. About 37% of the machines in our installed fleet are older than ten years. So Helena mentioned that besides service growth, we also have the chance for replacement. So I think she mentioned in iron ore where we had a big fleet installed more than ten years ago; now that fleet is coming due for replacement. So we will see more mid-life rebuilds and end-of-life rebuilds. And we will also see more equipment demand coming from that. And that is why we see that kind of consistent order growth over time. Because as the fleet ages and then the boom comes or the downturn comes, you are always working on the equipment. So you are either prolonging the life of it, hoping to sweat the assets more, or you are replacing it to get the latest generation, most productive piece of new equipment out there. So that's why it's important that we're on that journey with the customer. Okay. We also see some structural changes in the fleet. There are fewer machines out there, but there is more work that has to be done on each one. Just like the 65-ton truck that you saw in the video. It goes up to 66 tons and it is running 20% more tons per shift. So you are going to have fewer of them. But of course, 66 tons is more than 65 tons. So that machine is going to see a higher duty cycle on the equipment, and at the same time, there is a labor shortage. So whether we're in Nevada, Santiago, or Perth, Australia, it is becoming increasingly difficult to staff the mine sites. And so they go for more and more automation solutions. And then you have to really agree with the customer on the technicians; is it our technicians or is it their technicians? Because we are drawn from the same pool. And again, it goes back to that initial discussion that you have with the customer about philosophy. So if the philosophy is they hire the technicians, then we train them. If the philosophy is we use our technicians, we also have to train them. So training is a big piece for us. And that is why I go back to that technology discussion and using the technology tools that we have today to get that training to effectiveness in a much shorter time. More than 50% of our fleet was serviced in some form in 2025. So there is still half of that fleet out there that is an opportunity for us to go after. Okay. We will again go back to Lin Pusheng from Dazhong Mining and talk with Helena about service.
So, how is that performing service on the machines?
I am. Going to. Zijin Mining. Zhangjiakou. 2020. Two. Xiao Dong Zhangjiakou to do so. After. 2022. 2021 Changzhou. Thank. You. Zhangjiakou.
Okay, so the strategy starts with the people closest to the problem. Helena Hedblom said that, and I believe it. We have 7,800 service employees across the globe. Sometimes they are on a mine site in a group of 200, like we mentioned in Mongolia. And sometimes it's just one man or one woman with a service truck that's going around a metropolitan area like Chicago, which has multiple quarries around it, servicing one machine at a time. So we have both models, but we invest early on in these technicians because they truly are an asset to the corporation. So we work with schools and universities, technical schools, welding schools, hydraulic schools, and then mining engineering schools to make sure that we're securing that next generation of talent. We were one of the first companies to start training technicians in China to expat into Africa. So we had an academy there that made a big difference when, as Zijin Mining, JCHX, and these companies moved out of China into Latin America and into Africa, to make sure that we could send technicians from the Epiroc side with them to ensure that we secured that services business. I am now going to talk about our next slide, which is a video about a good customer of ours. He was actually here last week, but Sebastian, the CEO of Pucobre, has been with us on this journey of solutions. So I remember ten years ago when I was running the service division and Pucobre started, it was very important that both his people and our people learned this kind of new philosophy. And that philosophy, as Sebastian told me, he said: Jess, I don't know if this solution you're proposing is worth 3 million or 10 million, but I want you to have your person on site and ensure that value, whatever that value is, is delivered. And so that was this kind of transition. And I think he's been really good at pushing us to make sure the value is extracted from those solutions that we're selling. So it's been a great learning ground for us. Oh.
We always try to improve and do things in a better way. What can we do better?
The technology is evolving very quickly. I believe one area that we can improve together is training and capability development. Why? Because operations and maintenance technicians, at least in our case, often have the same basic education that they had 5 or 10 years ago. A clear example of this is the adoption of the Simba COPROD product. So while the technology delivers clear benefits in this case, in drilling accuracy and control, it comes along with a very steep learning curve, which affected how fast Pucobre can reach the full potential of the machine. So this experience showed that the advanced equipment alone is not enough. To address that, for example, we are working with Epiroc to develop internal drill masters with Pucobre people who deeply understand the technology and can train others in day-to-day operations. This is a real challenge, and I think it's an area where Pucobre and Epiroc must continue working together, focusing not only on the equipment but on the people who operate and maintain it and which specific capabilities they will need to deploy the full value of the equipment.
Okay. I would like to welcome to the stage. Christel Füllenbach is our global vice president of operations for our service division.
Thank you. Jess. Yeah.
Yeah. Hello, Christel. Welcome to the Capital Markets Day. Thank you for being here. So we talk about service and we often jump right into systems and tools. But what is really the challenge that we are solving?
Yeah. At the core, just don't imagine sitting here in the room. Imagine you are standing in front of a machine. Everything comes together: forecasting, planning, and customer expectations, and you need to solve a problem and you need to solve it fast. And this is what our service technicians see as reality every single day, several times. And this is also why we decided to invest heavily in the digitalization of service to support our service technicians. This means we did not start with, 'Okay, which tools are available?' Rather than asking, "Which tools are available?" We started by really identifying the problem our service technicians face today and how we can support them in the best way.
Sounds good. And how does this look in practice?
Yes, I can show you. So we have a technician co-pilot. And just imagine I asked this copilot, okay, I'm a new service technician, and I want to do the daily maintenance work of a Smart ROC E65. And I get the answer directly. And then I asked additionally, okay, but how can I do this? How can I change the air filters? But I don't have a hand free. This means I am just talking with the Copilot, and it is also working. And then we often think everybody is speaking English, but this is not always the reality for our service technicians. That means I can even ask—I asked it in German—can I have some videos to explain it to me? It also provided me with the answer. So you see there, this is a really fast solution to reduce the rate of failures, improve our repair times, and invest in our service technicians so that they can solve problems faster.
Sounds good. So once the technician has to support this in the field, how can we scale this across Epiroc and all those thousands of mines?
That is a really good point, because this is for sure a good interface for the service technician. But we know that behind an AI or a tool, there are always a lot of processes and other tools. So, one tool I want to highlight is our asset performance management system. Epiroc Uptime. This is really our backbone of machine data, of forecasting, and of parts availability, and where everything comes together.
Good. And everyone in this room is very eager about business impact. What does it mean for us?
Yeah. Let's say it this way. When we have better forecasting, we have better parts availability. And this means our working capital can be optimized because, at the end of the day, it is inventory optimization. On the other hand, for sure. Also, the machine uptime of our customer is improved, which means that the customer satisfaction is much higher. And on the other hand, they come back for repeat business with us because we are there to support.
Okay, we have spoken a lot about customers, but if you could conclude, what about the customer experience from this?
Yeah, the customer really sees that the uptime of the machine is higher on the one side, and this is what it is about just mentioned. So our machines are the first point in operations. It means that if our machines stop, it has a significant impact on our customers. So their availability is much higher. And on the other side, we can also improve uptime, training, and all of this together with our customers.
So, loyalty.
Loyalty. Exactly. Yeah.
And do you think we can improve this further, or are we already excellent?
No. This is part of our service ecosystem, and the service ecosystem is good, but what we have done now and what we are doing further is ensuring we get a feedback loop back to engineering, R&D, and parts planning. This means with the feedback loop, we do not just solve the issue when it occurs. We even prevent failures from occurring because we analyze recurring issues, adjust our engineering and R&D processes, and consequently achieve much better customer satisfaction and higher machine uptime. And we also invest a lot in the lifetime of our machines.
Perfect. Thank you very much, Christel, and keep up the good work with all the service technicians.
Thank you, thank you.
Thank you.
I appreciate that. Okay, this slide really shows why service agreements matter so much to us. So today, about 33% of our addressable fleet is covered by some type of service agreement. A simple one, like a preventative maintenance agreement, all the way up to a full service agreement. That is up 26% since the last Capital Markets Day. And that progress is important. Machines under agreement generate twice the revenue that machines not under agreement generate. So how high do we want to go? You know, I would really like to see, but the important thing is that we keep climbing that ladder and increasing the amount of machines covered. But I would like to see us within a few years be up at the 40% coverage rate. Service agreements strengthen that kind of loyalty and satisfaction. And again, going back to what I said earlier, it puts us there for the life of the mine and ensures that we secure the life of the fleet, and finally, the operation of the mine. So let's go to the next one. If we take the next step, which is really service agreements to full partnerships, we can see that the top ten customers at Epiroc represent 18% of the group revenues and they are growing faster than the group average. And so that is not a coincidence. It's the way that we work with those customers. So with many of these customers, we're deeply embedded in their operation; whether it's the 200 technicians in Mongolia or the 700 technicians in India, it's important that we, again, live and breathe that mindset with our customer as they go through the journey. This is exactly what we aim to scale: more service agreements and that kind of deeper customer intimacy and relationship, driving the quality of our growth and earnings going forward. So having more customers treated in this manner, as we do with our top ten in automation. We earlier talked about the automation and the benefits of running those machines through the shift and getting those extra tonnes to the crusher and out the back gate at the customer, which is really being that value driver. But as utilization increases, so as you run those machines more and more hours without stopping them for operator changes or anything else, it means more maintenance. It means more demand for parts and service consumption. The data is clear: over seven years, a Simba M7C in production generates at least 14% more parts revenue, and a Pit Viper 351 automated generates 33% more revenue for us. It is just because it is running those extra hours and not stopping. So this is the direct link between automation utilization and the service growth that we are seeing. Okay. The same applies to electrification. So the electrification journey. It adds new service layers such as the batteries, the infrastructure like chargers, and then the lifecycle management of those batteries, including the end-of-life and recycling of them. So we see at least 15% more service revenue on electrified machines over five years. All else being equal. This next video highlights the benefits of electrification. And again, going back to that story, it's about the economics, not necessarily the ESG benefits of going electrified. Go ahead.
We entered into electrification some years ago together. So, can you describe Glencore's ambition when it comes to electrification and also give some insight into the work we have been doing?
Yes. No, I think that certainly is an imperative. I think Glencore is committed to the clean transition. And more importantly, I think what we have been able to identify are these opportunities to electrify, which actually make commercial sense, even if you did not believe in any other imperative. And certainly, our investment at Onaping Depth with your equipment there has really underlined and highlighted the opportunity, as that mine is very deep. It has a very high heat load. And so, the opportunity to deploy battery technology, which is mature and developed into that environment, certainly was a great opportunity for us. And that investment has then provided a platform for the region, for the city. It ensures ongoing nickel production, ongoing employment and the ability of our business to continue contributing there.
Okay, so let me step back a little bit and talk about what is that next phase of growth? To me, it is really about digitalization at scale. So far, I have shared with you what those improvements are that come with better productivity and uptime. But the key opportunity, I think, for you to take away from here is the scale of the opportunity. Globally, there are thousands of mines and most are still not connected. They are still not connected to either automation or electrification. And so there is a huge opportunity to scale these solutions across the globe. We focus on three areas: connect. So, making sure that we can connect all the machines on a mine site. That is why we focus on this kind of OEM-agnostic approach and make sure all the machines on site can speak that same language. The second one is we focus on automating, so deploying autonomous solutions across large mixed fleets. And then the last one Helena mentioned is about collision avoidance, but it's fundamentally about safety. So protect, plan, and sustain. So either we're making the fleet safer or we're making it more predictable when it comes to, like Christel mentioned, planning the spare parts and the technician availability on the site. So we have the capabilities. Now it is all about scaling and teaching our teams, wherever they are, how it is. We are going to deliver that value going forward. These solutions require low capital. They scale quite fast with the AI tools. They make it even faster because we can get salespeople and technicians up to effectiveness faster with those tools. The profitability today is low in some parts of our portfolio, and it is high in others. So the growth potential is high. And that scale then makes it possible for us to improve the margin on those smaller businesses. Okay. Håkan Folin went through this in detail, but in our businesses, we also have different parts of the company in these different categories. But stability is really about making sure that in our decentralized structure, our leaders understand where they are at and where my business is today? Am I in the stability phase? Am I in the productivity and profitability stage, or am I in the growth phase? So it is something that is instilled in us from the very first years that we started with the group. But that's the way we want our leaders to look at their businesses and be honest and move forward up that ladder. Okay. So just to close this section, our goal is to give our customers that one consistent Epiroc experience, maximizing the value across their fleets, services, and geographies. So whether they are a customer that is operating regionally or globally, we want that kind of felt experience to be the same for them across the globe. And when we do that well, our customers remain loyal and they come back to us. And that service intensity increases because they trust us to take that journey with them. So thank you very much for taking the time. It is time for me to bring the next speaker on and introduce him. And so, I am happy to know José. Over most of my career and 38 years with the group, he is definitely one of my heroes.
Thank you. Yes. Amazing. 38 years. I suppose time flies fast when you enjoy what you do. And for me, it brings me to a reflection. It is when you find the dream company you want to work for. But let me start by having you introduce yourself. I will walk you through the tools and attachments business area where we operate, where the productivity is created at the drill bit, at the bucket, at the breaker, and at the point where the machine turns power into output. As Helena said, we focus on attractive niches that provide recurrent demand, high customer relevance, and a clear, profitable growth. We work in hard rock for mining and construction, and to keep it very simple, in tools. We complement the best equipment and service provided by Jess and his team, with the best tools for the best performance for the customer. In attachments, the carrier can be supplied by any OEM, but the attachment is what defines what the machine can do. So best attachment, best performance for the customer. And this is not a price game. What the customer buys is performance, reliability, and total cost of ownership. And Epiroc is the answer. But let me show you where we are today. So the business area was affected badly by the slowdown in construction. Under-absorption at a few of our manufacturing units occurred, but we didn't stand still and we took actions. Decisive actions to target our problems. Like what? We have implemented portfolio rationalization and optimization. We have implemented operational improvements. We also implemented pricing initiatives and optimized our footprint, meaning we consolidated a few of our sites. What is important to notice is that what we are addressing here is cyclical. It is not structural. The fundamentals of our business remain strong. Our position is intact, and the long-term value proposition remains valid. This is a reset in performance, not a reset in ambition. And let's zoom in starting with tools. This is a high-performance, recurrent, and innovation-driven part of our portfolio. And here the growth is clearly structural. The demand for metals increases. So does the mining activity and the drilling activity. Ore grades decline. That means that we need to excavate more rock, which demands more drilling and higher consumption of tools. Mines go deeper, become more complex, and automate. As you heard from Jess, that needs a higher performance. Premium tools are essential as mines go deeper, necessitating rock reinforcement and ground support to ensure stability and safety. We offer high-end consumables for hard rock excavation. Our products include consumables, tools, and digital solutions for ground support and rock drilling. The majority of our business is done with mining customers, so there is a strong correlation between the mining activity and the tool growth. And for the tools business, this is clear. It is built on clearly decades of innovation for over 120 years. So, this is our story, our history. So that is a story of solving one problem at a time, improving bit by bit from pneumatic drilling to the introduction of the cemented carbide bits with the so-called Swedish method, one man, one machine that revolutionized the mining industry at the time to the introduction of better tools. When the first hydraulic rock drill was introduced in the 70s, to the improved drill strings during the first decade of the 2000s, to the. One of the latest innovations. The Powerbit was the answer to the shift towards automation, which demanded longer service lives for the bits. And now we are entering a new era with the so-called PCD bits, the polycrystalline diamond bits that have their buttons covered with synthetic diamond. And this is a really big boost in productivity. As you can see in the graph, a single bit drills more than 3,000 meters. So, it's a quantum leap in productivity. This is the bit that changes the economics of drilling; it is the beauty. The beauty and the beast in one piece produces higher productivity, higher uptime, and a longer service life in the range of 3 to 5 or 5 to 10 times, depending on the rock conditions, but it is also the perfect match for automation that drives safety, lower operational costs, and a lower CO2 footprint. And another impressive innovation is the Simba that you heard Mr. Sebastian Rios from Pucobre talking about. Simba, as you heard Sebastian Rios from Pucobre talking about, and I want to show you one film just to let you know all about it.
As hole length increases, traditional long-hole drilling becomes less accurate and more prone to deviation. This often leads to poor fragmentation. For Simba, hole deviation is minimized, giving you more accurate drilling, less dilution, and better alignment with the drill plan. The result. Improved fragmentation and better ore recovery. You also gain a significant productivity boost thanks to extended stope height and the removal of a sublevel.
So COPROD, our proprietary drilling system widely used in surface drilling, is now brought to underground production drilling. It combines the strengths of the DTH with the flexibility of the tophammer to provide longer holes, straighter holes, and much higher accuracy. So this translates into customer value immediately. Customers can drill twice as fast, can reduce 30% to 50% of deviation, and at the same time could also have a benefit of having less development work, as you have seen in the video. Longer holes, fewer sublevels. That is money in the customers' pockets. And now if we move to attachments. Attachments are sometimes seen as an add-on. We see it differently. The attachments determine what the machine can do. The performance. The productivity. Very important. Here we see also that the growth is structural. With all the megatrends in the market, urbanization continues. And that brings the need for tunnels, metros, water supply, sewage, and energy networks. At the same time, there are announcements of large-scale infrastructure investments. Like railways. So overall, the market grows in mid-single digits. And that will give us a big opportunity to grow together with them. So let me show you a video about our specialty attachments in the real world.
Infrastructure is moving underground. Railways are expanding. Electrification is accelerating. Climate pressure is changing how projects are built in these environments. Standard tools are not enough. Reliability is critical. Performance is non-negotiable. This is where our portfolio stands apart and brings maximum force across multiple specialist brands. We cover the most demanding applications in infrastructure across the globe, from extreme power to precision and control. The world's largest and strongest breakers. High-performance shears cutting through the hardest steel, trusted tools powering rail electrification, and utility solutions that make flooded job sites workable. Again, because where infrastructure cannot fail, the right tools matter most. Epiroc offers one of the world's most comprehensive portfolios of specialist attachments built for the toughest environments.
We used to say we turn machines into productivity platforms. What do we mean by that? Well, clearly one machine with a single purpose will have limited work and stand still for a long time. When you can have a machine fitted with different attachments, the multiplication of the tasks leads to really higher utilization. More money for the customer represents that the customer can do up to six times the number of tasks that they do with a single machine. And if we project this, how many tasks you can cover with one machine represents that the CapEx in new, single-purpose machines is reduced. Feedback from customers is around 30% to 40% lower CapEx. That is a significant amount of money for the customer. And that creates also a good business for Epiroc because the attachments bring recurring revenues, parts replacement, and upgrades. We should note that there are only a few global players at the high end of the attachments market worldwide. So, for us to remember, attachments are not just accessories or add-ons. They are productivity-critical solutions, the key drivers of productivity. But how do we scale the business? Well, to scale attachments, we want to use a multi-brand, multi-channel model. The market is very fragmented. Customers run mixed fleets. Applications vary widely, and purchasing criteria also change significantly by geography or by segments. So a single brand approach would limit our reach. Now our portfolio is set for many different types of OEMs, different types of buying criteria, premium or more value-oriented attachments. It also creates the opportunity to select different attachments for different regions, applications, and customer demands. Customers are not equal in all parts of the world. And how do we achieve that scaling? Well, through our dealer network. So we have today more than 2,700 points of sale, more touch points closer to customers that represent more opportunities for us. So, the model is clear. It is multi-channel, multi-brand, and broad in reach. And to grow attachments, we also need to be where the machines are across brands, across fleets, and across markets. So OEM partnerships give us perfect access to a much wider fleet population. What is the value for the customer or for the OEM? The right carrier with the right attachment for the right application. It is excellent for the customer's needs, at the moment, and in the place that they select. What does this mean for Epiroc? Well, we generate higher revenues because we have access to global fleets. We also have better service coverage, which provides us with capital-light growth. He said that partnership is the new leadership and I cannot agree more. However, at the same time, in selected segments and applications. We go direct, like in mining. We leverage our customer relationships. Because of our expertise. By leveraging the rest of the company's portfolio, we get closer to the customer. We can bring solutions for the entire fleet. We do not sell a product. We try to sell a solution, and that allows us to listen more closely and bring the feedback for better and faster innovations. So. That brings me to innovation. And I want to present to you two amazing innovations among many others; to your right, we have the RadCom and Insight that give real-time, full visibility of where the attachment is, including location, usage, and maintenance. We actually have more than 5,500 attachments connected. Another amazing innovation is the Performance Booster. Have you heard about it? Well, it's an add-on, retrofitting a component for the pulverizers. And it represents immediate customer value. Customer value because it increases the crushing force for the concrete to be demolished. It also offers shorter working cycles and saves fuel for the customer. So again, a big improvement in productivity. And what is in it for Epiroc is that we monetize performance. Let me show you now where we produce many of our premium tools. That is in the Kalmar factory in Kalmar, Sweden. It is not just a factory. It is our center of innovation and operational excellence, and it provides long-term competitiveness. Let me show you what it is about.
On the east coast of Sweden, in a town called Kalmar, Epiroc is redefining the future of manufacturing. Setting a new standard for Sweden and beyond. After a complete production transfer from Germany to Sweden, we are bringing advanced manufacturing to the next level. This facility is designed for premium products built with precision, scale, and unmatched engineering capability. One of the most automated production sites globally, combining cutting-edge technology with smart manufacturing processes. A strategic investment that strengthens capacity, efficiency, and long-term competitiveness. Powered by expertise where experience meets innovation to deliver premium quality at every step. Epiroc Kalmar is more than a factory. It is a blueprint for the future of high-performance manufacturing and the world's leading production facility.
And you heard from Håkan. We run our business in three stages: stability, profitability, and growth. We build a business that performs through the different cycles and market fluctuations. We stay focused and selective, investing in products that create real value for the customers and, at the same time, provide strong margins for Epiroc. And the growth will come through broadening our reach via multi-channels, multi-brand strategies, or our, for instance, yellow and yellow programmes. The ambition is clear. We want to deliver both growth and industry-leading margins. To conclude, I want to leave another reflection. Traveling around the world for so many years, meeting customers. What I learned was that the most important thing that matters for the customers is really to deliver customer value and together in true collaboration, that makes the difference for them. Because in the end, if and when the customer wins and makes money, we win. Thank you very much.
Thank you. Thank you. Yes. It's time for me to wrap up before we do some Q&A. So, just to summarize what we have tried to communicate today, everything starts with the customer. And the best thing that comes out of a mine is the miner. We make operations safer, more productive, and more sustainable every day around the globe. We focus on where performance matters in our industry. Downtime is the most expensive thing, so customers don't choose us just because of the price. Customers should not choose Epiroc because of the lowest price. They choose us because we improve uptime, productivity, and the total cost of ownership. We are also not just selling equipment; we are supporting our customers across the full lifecycle through service, tools, attachments, and technology. And that gives us recurring revenues, high margins, and resilience over the business cycle. What you have seen today is a company that is evolving. We are moving from being an equipment supplier to becoming a productivity and technology partner through automation, electrification, and digitalization. We are helping our customers to get more out of every machine and their fleets. Outperformance is not about peaks. It is about consistency, delivering growth, margins, and cash over time. With our strong culture, global presence, and innovation leadership, we are confident in our ability to deliver profitable growth. Onwards to you, our shareholders. And before we start the Q&A, I want to show yet another customer movie, this time with Marna from Ivanhoe, illustrating how we together, united as partners, will tackle the mining of the future. Please start the movie.
Do you have any favorite memory of Ivanhoe Mines' collaboration with Epiroc over the years?
Well, I have many favorite memories about tough meetings we've had, but that's part of a partnership in any family. You need to be honest in terms of what your needs are, and I think Epiroc always meets our needs. But I think the standout moment for me was when we implemented advanced technologies at one of our sites, which we struggled to adopt, and Epiroc was willing to switch out equipment for us on short notice to enable us to meet our targets. That has been much appreciated. And it's a strategic partnership that I'm sure will be in place for many years to come.
So we always try to improve. So, is there anything we can do better moving forward?
I think the biggest thing for all mining companies in the future will be ensuring that the critical spares we need are available. And when there is demand to grow our business, we can do so quickly. So it's responsiveness, it's price competitiveness, and then it's technology. And how can we innovate? How can we do things better in the future? So I think those are items we can all work on together to ensure that it's a sustainable industry where we can all make the necessary profit margins, but also collaborate to make the industry more efficient and more long-lasting.
Thank you so much for joining me today and thanks for the feedback.
Thank you. Thanks for having me.
So perfect. Thank you. Well, I see two hands here. I see one there. I am going to start with you. Three. It is time for Q&A for those that did not see. Okay. Two here, two here. Klaus, if you start, please.
Sure. Thank you. Klaus. That is it. So my first question is on the growth and implications for the margin. So obviously if you apply the target 8% CAGR to 2031 to reach 100 billion, that equates to 5 to 6% organic growth based on your typical organic versus M&A split. And then you say 3 to 5% long-term mining growth, and 4 to 6% infrastructure CAGR. So on your exposure, it's weighted, that becomes around 4% market growth. A little bit more. So we are talking about 1% to 2% outperformance. So can we please unpack this. Where do you think you can take share? And if we can focus a bit on mixed-fleet automation because you are talking about it a lot. Yes. About this very strong growth. It seems like you have a low single-digit market share today. You talk about over 112,000 machine market potential on slide 114. And what kind of market share do you see as necessary? Do you see it as necessary for that margin to stop being diluted to the business. Is it 10 to 15 percent? So, sorry, that was a long question.
It is kind of two questions as I take it. Where will we grow and take market share? And then on the mixed-fleet automation. So, should we start with the first?
Maybe I can start. Maybe if we try to unpack the growth of 8%, if we look on as we say, in general, then okay, two-thirds being organic, one-third being coming from acquisitions. If you look at our historical growth pattern, we have been growing faster in mining compared to infrastructure. Of course, infrastructure is now hampered by very low activity levels. Of course, if infrastructure bounces back, that will of course boost that revenue stream. But when we look at it, we have a very strong position on equipment. But of course, the largest growth potential for us is the aftermarket within service. We just mentioned we serve a little bit more than 50%. So of course, that portion is a great opportunity to grow the service business, but also to grow the tools business that José Manuel Sanchez talked about, which is also related and predominantly towards mining. So I would say that is where we see the biggest untapped potential given what we have today. And of course, in our strength and our history, I would still say it is within mining, even though a strong uptick in infrastructure will support us greatly because we have the foundation and we have the products.
Good, and on the topic of mixed-fleet automation.
Yeah. So if I talk mixed-fleet automation, one of our most profitable parts of that digital portfolio is our Teleremote business. And that is the one Helena mentioned with the refuge station, but that is one that we are operating in a handful of countries today that we see actually quite some opportunity to then expand it outside of the handful that we are in today.
But then you also have ASI Mining that sits within equipment, and then you have Plan and Protect, which is sort of interlinked because that's the software to drive these, so that everything can communicate together. You have Raytings, which is a low margin. Here is my logic. I am just going to try and explain it in a different way. So, three years ago, at the same location. You had 2,400 units of mixed-fleet. That is 3,900 today. That is an 18% CAGR. If I extrapolate that to 2031, that would be 9,000 machines. And you gave this number 112,000 on slide 114. It could be more as a TAM. That is a 9% share. So when you have that package together, as I asked, and more units under the belt, like what kind of market share do you need to see that margin stop being diluted? Maybe it is too detailed, but a lot of investors ask us.
I think the opportunity here is tremendous. Of course, if you look at what we have done, we have acquired two entities who, of course, also developed our own solutions towards this, the LinkOne platform, for example. Now, that is also controlling our automated drill rigs. But when we look at the total potential here, it is significant, and we are just getting started. So even though it looks like an 18% CAGR, which is good. We are still in an early stage, I would say, when it comes to rolling out, as you mentioned, in a handful of countries when it comes to mixed-fleet for surface; we have just nailed the solution and now we are scaling it. So I would say these are great opportunities. And that is also why we have invested so heavily in this area.
Thank you.
So thank you Klaus from Citi. It's John from Deutsche Bank.
Hi. Thanks for the intro. Two questions, if I may. If we think with a ten-year view, these newer initiatives, the leverage of pooling and service digitalization, the BEV, and the automation, what percentage of either group or OEM revenues do you aspire to, and how much stronger are the growth rates in these verticals? Are these two to three times what you think your core business can do?
When we look at the new technologies, as I say, automation has been growing in a good way. So that technology is further along. But as I mentioned, the potential is vast. Of course, the total potential opens up rapidly when we can do mixed-fleet automation for electrification. It is still early days. So if we look ten years from now, we believe that this will be a big portion of our revenues. And that is also why we keep on pushing, of course, so much product development into these segments to make sure that we will be the one winning this race, because the business logic for customers is clear. So, we are convinced that this will be a big part of our business ten years from now.
Okay. And a quick follow-up, if I may take you into the weeds for a second on slide 101, you have a kind of a decay of the effectiveness of a machine in the field. I think you presented it. I want to know if there has been any change in behavior on how customers in key hard rock verticals are choosing to re-fleet or refresh. We are enjoying very strong commodity prices. I think expansion of production has been challenging, but has that actually led to faster turnover to actually de-age the fleet where there is structural demand?
I would say that what we have seen; you can reply as well. Yes. But I think what we have seen so far is that, of course, the lead time for replacement for larger machines is still nine to ten months. So of course, I think this is what we see. Both that we have high growth levels of these types of mid-life rebuilds, trying to push up the life as much as possible. And at the same time also, more and more replacement. But, you know.
Yes, I think if you look at any of our key customers, they may have more than 50 mine sites, and one mine site might be in need of additional production. The other one might be focused on cost reduction, while the other might be in a steady state. So it's a bit mixed. If they are able to wait for that replacement to show up, they will. But if they need to make hay while the sun is shining, then they keep that fleet running until the very end. So it's kind of a mix, but we have both conversations happening today.
Good. Then I am not sure if I am on the line. Sander from J.P. Morgan. Please go ahead.
Yeah. Hi there. If I could just follow up on the growth question. It clearly seems like a very exciting time on the mining side, and perhaps it feels like it can grow the business and grow faster than the 8% growth target that you have outlined. If I think about the moving parts, how sustained do you think this growth can be, especially after the Q1 results? Very strong orders. In other words, should we expect a few years of outsized growth and then maybe some normalization. Thank you.
I think when we talk about the underlying activity levels, that is very healthy in mining, and it is healthy both on the equipment side as well as the activity levels driving the aftermarket. Of course, if we look at it, we have had a couple of quarters now with large equipment orders like we had in Q1, which really boosted the orders received for equipment; of course, you can have quarters like that. But when I look at the pipeline and we are tracking the large projects that are out there, say 18 to 24 months, it is a very solid pipeline. There are large fleets that are to be replaced, but there are also brownfield expansion projects and greenfield projects in the pipeline. So, we are of course trying to maximize everything we can get when commodity prices are at this level. But there is also a structural need for replacement, especially regarding certain commodities where the fleet is starting to age. It is older than what we showed here when we look at it from an average perspective.
And I would say the 8% target is over a cycle, as I am sure you have seen us and heard us say. And when we look back over the last 11 years, we were basically spot on the 8%, perhaps slightly by coincidence. And right now, just like Helena Hedblom said, both short term but also medium and fairly long term, it looks very good. We talked in the presentation, I guess it was, about copper. And that actually doesn't really match long-term demand and supply. So we are optimistic. But then, as I talked about, cycles come and cycles go, and 2031 is five years out. In time. We will see what happens, as it looks right now, for sure. We have the potential to outgrow the 8% target.
I'm sorry, may I also follow up?
Moving on to the electrification commitment. What are the statistics? I think what you mentioned was that maybe even 80% of the fleet could become electric by 2040. Could you please size that in terms of the opportunity, maybe percentage that would mean for your growth?
So what the slide is saying is that of mobile equipment underground by 2040, the estimate is that 80% of those vehicles, not only mining vehicles but also utility vehicles, will be electric in some form.
So for us, what this means is that we have a very strong position today and we will be able to defend that position and take market share, because there is still plenty of opportunity. There are still small regional players out there as well. So, of course, for us, it is to protect and maintain that position, and to take market share, because if you can electrify a machine and at the same time improve productivity by 10%, that is something that is not just about the CO2 reduction. It is actually productivity as well. So, of course, the ambition is to take market share as well, based on this new technology.
And then on top of that, as we also showed on one slide, when we sell BEV equipment, we also actually get more aftermarket business.
Thank you, Jitendra. James Moore from Redburn.
Thanks. It's James from Rothschild & Co Redburn. Two questions if I could on Equipment & Service. Maybe. Maybe for Jess, perhaps. Maybe for Jess, between 2021 and 2025, your revenue grew about 12 billion organically. If we take out currency and acquisitions, keeping the numbers simple, your organic EBIT went up 2 billion with a drop-through below 20%, well below your gross margin structure. I am familiar with the reasons you gave: the acquisitions, the mix solution from digital, and the fact that you have a high share of equipment. But just broadly, we are in a good market. Copper and gold prices are high. It is off the peak, but well above planning rates. You are going to grow at low double digits for the next three years, sure as eggs are eggs. If you do that, what sort of drop-through can we get in the Equipment & Service division? And have we bottomed? Timing-wise, it looks like we have. What sort of drop-through can you get, and what is really credible given the shifted mix of the company and all the M&A that you have done? It's 2026 now, totally off the cards because of the change in mix. What is a credible profit margin to aim for?
Okay. I'll take it.
So yeah, that journey, 2021 to 2025, was definitely affected by acquisitions and definitely affected by a couple of big events like the Russian war and Covid, right? The tail end of Covid, the inflation after Covid. So that definitely affected the flow-through. And I would say that we always aim for this positive flow-through and accretive result. And the team definitely understands it. But I think no one up here can predict what is going to happen, as black swan events seem to be quite more common than they used to be. So let's see. But I think the team really is quite disciplined. And I think Håkan Folin said every krona is a prisoner here in our pocket. So we are very careful. And I think that journey 2021 to 2025 was fantastic. But it was again, really focused on every tenth of a percent that we could look at in the margin. So, we will definitely execute in the same way we did. But of course, the market fluctuates and things happen, right?
We don't have a margin target. So and neither do we have a flow-through target.
Talking to the concept of whether we have bottomed, because it has been four challenging years. It looks in the first quarter like we're showing some encouraging signs. But do you feel like, with the split of service into three pieces, with the digestion of all of the dilutive digital acquisitions that you've done, and with the market turning, you've got some visibility that we don't have, given the quite lot of complex mix moving parts? Do you feel that you've got your hands around the business now, and you can feel that we've had something of a floor, at least, even if we don't talk about the expansion?
Yes, I would never hesitate to call a bottom, but I hope that we are, let's say, on that uptick. The actions that Helena and the team took last year are showing visible results. So yes, I have optimism that it is there, but I'm not going to call it.
So thank you, James, Andreas and P, please.
Thank you very much.
So, my first question.
It was also about the electrification data, and the 80% of the mobile underground equipment being electric in 2040. I would guess that requires a relatively large part of your equipment sales already in 2030, maybe 2035 being electric, because you mentioned that of your total fleet, almost 40% of your installed base is older than ten years. So the first question is basically, do you believe that a very large part of your equipment sales already in 2030 or 2035 will be electric? What is the value opportunity of your electric equipment versus your diesel-driven equipment? You mentioned the upside potential in aftermarket, but is there also a much higher value attached to an electric vehicle versus a diesel-driven vehicle? Thank you.
What really drives the age a lot is surface. Machines turn over quicker underground. If we look at where we have started, where electrification has taken off. It is underground, so of course the transformation will be quicker underground than on surface. But we have also seen more and more interest on surface as well. Now we are selling more and more electric types, for example, with Fortescue deals. So I think surface will come on board if we take 2035. I am convinced that a big share of the fleet we put on the market will be in some type of fossil-free version. It might not be BEVs fully; it could also be cable-electric ones for certain applications. And what will that then give us? Of course, this is much more advanced equipment than having a diesel version, and I would also like to say that, for us, automation and electrification go very much hand in hand. When we look at 2035, I do predict that a large number of the large orders will be both automated and fossil-free versions, and that, of course, gives them higher aftermarket potential, but also makes it much more difficult for other smaller players to capture that share from us. So that is how we build a wall around that aftermarket. But that is also not only service, battery as a service, or service contracts. It is also the product that I mentioned, like COPROD bits, for example, because if you have a fully automated mine, you do not want someone to go in and change the bit all the time. It really expands the potential; these technologies expand the potential of the full system. I would say the mix.
Is the mix shift not going to drive a higher equipment value as well? It is mainly in the aftermarket where you are seeing the growth opportunity, or do you also see it elsewhere?
See, it's also equipment value. I would say the more advanced the machine, the higher the value is. When we sell them as well.
It is the automation. To be clear, it's the automation that drives that higher value of the equipment. And so, when you go with the electric machine, you go for the higher automation level as well.
Okay. So it is not that it is.
It is not that it is a better price just because it is electric. No.
Yeah. And then just quickly, I was a bit surprised to see—I don't know if it was your estimate—but the market growth in mining of 3% to 5% and in infrastructure of 4% to 6%. Does that mean that a lot of your M&A will also happen in infrastructure? Because that will be a faster-growing market? And do you see yourself expanding into, say, new products in infrastructure that you do not have today because of that market growth? Thank you.
So the market growth that we have shown is in the niches we are actively working in. It is not a general market, and neither is our growth from each. But it is basically our niche. We are. That is the growth that we anticipate in the long term.
But when I look at it from a historical perspective, we have been growing faster towards mining. Of course, we have a very solid presence, footprint, and installed base. And so. So I do expect that, you know, a lot of the organic and inorganic initiatives, the coming ten years as well, will be towards mining. If I look at infrastructure, it is a good complement. What we do in between these two segments is that we use the technology we developed within mining, and we bring it into infrastructure to help boost the productivity. So it is a lot of shared technology between these two segments, even though it looks different. But from a platform perspective, when it comes to technology and our manufacturing footprint, we certainly share those. So. But I wouldn't say that; I don't think you should be worried that the overall mix of the company will change. We have a very strong, we like to have a strong tilt towards mining.
Thank you.
So before we continue in the room, I will take one online. It is also on M&A as we speak about it. It is from Max Yates. Strategically, how have Epiroc's views evolved on whether they would be interested in doing larger M&A into midstream mining, for example, pumps and grinders.
As Håkan mentioned here on M&A. So we are constantly looking into the opportunities that are out there. If I look at the different segments that we explore, it is complementary to core and what is complementary to core. It is very much adjacent to products that fit well into our offering and where we can leverage synergies in cross-selling these products across the globe. So I would say that it is about closing gaps or product strengthening. The aftermarket could be companies that produce consumables. They could be service providers that have a strong regional footprint, for example, or a regional business somewhere where we want to expand, but also then technology companies. So it is also towards technology. And I cannot answer specifically on that question with exactly that type of niche product that you mentioned. But I would say in general, this is our thinking around M&A. So it will be close to what we know, where we know that we can leverage the strength of Epiroc. Epiroc.
Good. So thank you, Andreas. Then we should take Gustaf Bratt.
Yes.
Thank you. I have a question on the replacement cycle for surface drill rigs. If you could help us understand how much of your installed base you think is either up for full replacement or larger rebuilds over the next couple of years? Thank you.
I will leave that to you.
Yeah. I think we showed that more than 30% of the fleet is older than ten years. So if we said that underground, it is more like a seven-year replacement cycle, while surface is more or less a ten-year cycle. So you have 37% then over that ten-year age.
So a majority.
And we have a very strong position in that segment. Yeah. So there is a big portion up for replacement.
Yeah.
Yeah. Thank you, Gustaf. We take Vlad behind Gustaf and then we take someone over here.
Thanks very much. Two questions. One on growth. The other is on profitability. On growth. For new equipment. You simplistically split the revenue into three groups, right? Greenfield, brownfield, and replacement. Are all three set to grow, and where do you have the best visibility for growth within those three? And then on margin, you obviously have an ambition to be an industry leader on profitability. What makes you confident in that? Is it that you view yourself as the best operator or maybe the best innovator? Or maybe you just have one of the best end markets out there? Drilling is a good market.
I would say that when we look at the equipment orders and break them down into these different buckets, we see growth. We see good growth in all buckets right now. And when we look at the pipeline, what we have ahead of us. It is also in all three. So it is not the case that one is outgrowing the other. There could be, of course, if we look at large orders only, there could be. I mentioned replacement for surface equipment, for example, being a potential. But also, if we look at the last three quarters and look into the exploration, which is then more towards greenfield mining. Then, of course, we also expect that to continue to perform. So that is both. It is both due to the underlying activity levels. But it is also due to the fact that we have a much stronger portfolio today than we had maybe five years ago. So we expect all areas to continue to grow. When we look into having an industry-leading margin, for us, we are. I would go back to our decentralized organization and our setup and the way we run the company, as we have been doing for many years. So we grow our leaders. As you can see internally, our people are trained very early on disciplined financial execution to meet their targets every year. And that's how you grow. So we have a very strong culture of improving every year, every month, every week. If you would listen to the conversation in this team behind closed doors, it's always about what can we do better? What can we do better? That is the type of dialogue we are having always, including when we are having a great month, as we are still focusing on what we can do better? So I do this. I think this culture of never being satisfied. We always try to do better. That is what gives me confidence in this company and these people. Because in the end, it is people. And of course, we focus on the right things. We have a clear strategy. But at the end of the day, it is people that deliver the results.
Thank you, Vlad. Thank you, Vlad, from Barclays. Now we go to Alexander Jones.
Alexander Jones from Bank of America, two questions as well, please. First, on the aftermarket capture rate. Jess, you talked about being just over 50% today. Could you talk about where you think that could get to and the pace of how you can reach that ultimate level? And then just on margins, again, I think in the presentation, you said that you recover quickly after downturns and then reach higher peaks over time. Is there any reason, after the downturn we've been in recently, that you couldn't reach a higher peak subsequently? Thank you.
Okay, I'll start with the aftermarket question. Higher. Right. I would like it to be higher than 50%. But of course, the usage of the machines is quite important. And so, remember we said that as the utilization driven by automation increases, the machine runs more hours. So I think we finally have a great opportunity. We showed it at Conexpo in Las Vegas. This automated drill rig is for the quarry segment. And then we mentioned quite recently automated haulage in a quarry segment. So the quarry segment is a segment where typically the customers ran day shift only and weren't really sweating those machines. Now that we see automation moving in there, it could be that that segment then helps drive more aftermarket than we have seen in the past. So that's an example of where we see it as possible.
And on the second question, regarding the margins. Uh, yes. We have historically seen that we have been recovering and reaching higher levels than where we were before. I think your question was whether it is impossible. No, it is not impossible. Nothing is impossible. It will definitely be a stretch, given that we've had a few years, 2022 and 2023, with really very good margins. Since then, we've added a few acquisitions, with at least one being quite large, and it will be hard to reach the previous group margins. So we said during last year, when we were below 20%, that we were not happy at that level. We want to improve. Last quarter, we were at 20%. We also talked about flow-through before. The most important thing for us going forward is to make sure that we continue to deliver positive organic flow-through quarter by quarter, year over year.
So good. We have one final question from online, and that is about our acquisition of Stanley from Pete Lewis. Did you achieve any of the expected synergies from the Stanley acquisition?
Well, we have worked on it, and I have said today, we knew what to do and we have taken actions to improve these synergies. One of the important things that Helena Hedblom has said is our culture, how we do business, and that is something that we need to work on earlier with these acquisitions to really understand how to run the business in the Epiroc way. Then actions in the execution are paying off today. And that is why we saw the improvement in the performance. And I think that the two together will give us an opportunity to grow.
If I may. So, you know, when we did the acquisition, of course, we had a lot of sales synergies. And I think that is what you are alluding to, Pete. So, sales synergies? Not yet so much. What we have stayed focused on in this environment has been consolidating footprint, making sure that, as you mentioned, we bring the Stanley Infrastructure business up to operational excellence so that when volume takes off, we will then be able to perform even better. So from a sales synergy standpoint, it is still early days.
Thank you very much. Thank you everyone in the room. Thank you. For those listening online. We will answer those questions that came through the webcast if we can. Some of them we will not answer. But if we can provide any color, we will, of course. Thank you very much. And for everyone in this room, we will go to the Hotel Scandic. And then from there, we will walk to the dinner. So say in 15 to 25 minutes. Thank you very much. Here. Thank you, online. Thank you. The management team. Thank you, Alexander, and everyone else. It's been a pleasure. Thank you.



















